S.M.A.R.T Available for RAID 0?


  1. SevenNerd
    Posts : 159
    Windows 7 Ultimate 64bit
       New #1

    S.M.A.R.T Available for RAID 0?


    Wondering if theres any software that can use "Self-Monitoring, Analysis, and Reporting Technology" on my raid array?

    My rig specs are in profile....
      My Computer
    Quote Quote

  3. Golden
    Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       New #2

    Hi,

    Unfortunately most SMART software are specific to the disks, incl. CrsytalDiskInfo, and once in an array, don't know how to treat the disks independantly.

    Does your motherboard support SMART? Perhaps there is an option in there that would do it?

    Let us know what you find.

    Regards,
    Golden
      My Computer
    Quote Quote

  4. pooch
    Posts : 1,524
    Windows 7 Ultimate x64
       New #3

    SevenNerd said:
    Wondering if theres any software that can use "Self-Monitoring, Analysis, and Reporting Technology" on my raid array?

    My rig specs are in profile....
    Hi I use AIDA64 AIDA64 | PC Benchmark | System Diagnostics | Network Inventory It is a pay programme (formally called Everest) and it has no problem reading my RAID arrays
    Attached Thumbnails Attached Thumbnails S.M.A.R.T Available for RAID 0?-capture.png   S.M.A.R.T Available for RAID 0?-capture1.png  
      My Computer
    Quote Quote

  6. SevenNerd
    Posts : 159
    Windows 7 Ultimate 64bit
    Thread Starter
       New #4

    Awesome pooch! Exactly what I was looking for thanks!
      My Computer
    Quote Quote

  7. pooch
    Posts : 1,524
    Windows 7 Ultimate x64
       New #5

    SevenNerd said:
    Awesome pooch! Exactly what I was looking for thanks!


    Thats great :)

    Just one point this has only just recently started working for me when I got this mobo so I guess it is maybe also hardware orientated
      My Computer
    Quote Quote

 

  Related Discussions
The computer has been fine for around 2 years, never an issue. About an hour ago I reboot the machine and instead of having my RAID 1 as my C drive, I now have two identical drives, the C drive and the H driveas well as an F drive. How do I get them back to where they belong? In the BIOS...
Hi all, My RAID 1 (I think? I have two equal drives that are mirrored) array was causing me a lot of pain. It kept freezing up my system and having me to had to rebuild the RAID too often. After a number of tests and browsing info online, I've decided that the RAID was the culprit of the freezing...
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when...
I am running 7 pro 64bit on a ASUS p8p67 deluxe mobo and I copied all data from my 1tb storage D: drive to a backup external and proceded to install raid 5 with 3 single 1tb drives and the raid is up an running. However using Intel Rapid Storage Technology to setup the raid inside windows I had to...
I created a windows system image with the backup and restore utility built into win7. This windows install is on a single hard drive. I built and onboard RAID 0+1 array and used the windows 7 install disk to restore the image on to the new RAID volume. Windows starts to boot up but the screen goes...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 12:41.
Find Us