My first solid state.

pparks1 said:

So, disable the onboard controller then, and I bet your error goes away at startup. You have 4 devices and they are all running on the Intel controllers.

I will enable the first in the list, the SATA RAID\ANCI i wil set it to ANCI

And i wil disable the ninth in the list,the Onboard SATA/IDE Ctrl Mode i will set it to IDE because there is not any disable option on that..


Ok Guys restarting......

Ok i have done the above steps and i think we eliminate the first error message?

But now,What is that??? I get this message then windows start normally.

Well i thing i will.....

""I will enable the first in the list, the SATA RAID\ANCI i wil set it to ANCI""

""And i wil disable the ninth in the list,the Onboard SATA/IDE Ctrl Mode i will set it to IDE because there is not any disable option on that..""

And i will reinstall the windows!! I believe THE FIRST TIME i enable the wrong ANCI.

ANY ADVICE BEFORE I START THE REINSTALLATION?

Panais

Nothing else I can think of. I can't speak for the others.

No, that looks good. Exactly what I see on my machines.

pparks1 said:

No, that looks good. Exactly what I see on my machines.

""No, that looks good. Exactly what I see on my machines.""

Really? You mean everybody with SSD\ANCI have the same message in POST??

Or is just a Gigabyte thing???

I had enable the wrong ANCI though so i will start again in a minute the format\installation in my new ssd.

And i hope i will be happy with my ocz vertex! I hope!!

A! give me a minute i have some new screenshots from my bios.

Yes, that is what it looks like when AHCI posts.

Perfectly normal.

Wishmaster said:

Yes, that is what it looks like when AHCI posts.

Perfectly normal.

Please check well all the screenshots and tell me if you see anything wrong in this settings,or anything you dont like it!

This is how its look like now!!

The only thing I can think of ATM that may be worth mentioning ...

Some Motherboards, if AHCI is enabled, will not boot from a CD if there is a OS installed on the system.
Even if it is set to CD/DVD as first boot device.

If yours does this:

On a Gigabyte board, when the motherboard splash screen comes up, just press F12 (I think it is .. please confirm) for a Advanced Boot screen.

Select CD/DVD drive and it will then boot from the CD/DVD.

Not all boards require this, just thought it was worth mentioning in case you decide to re-install from scratch and the Win7 DVD will not boot.
You'll know how to proceed.

Wishmaster said:

The only thing I can think of ATM that may be worth mentioning ...

Some Motherbaords, if AHCI is enabled, will not boot from a CD if there is a OS installed on the system.
Even if it is set to boot from CD as first boot device.

If yours does this:

On a Gigabyte board, when the motherboard splash screen comes up, just press F12 (I think it is .. please confirm) for a Advanced Boot screen.

Select CD/DVD drive and it will then boot from the CD/DVD.

Not all boards require this, just thought it was worth mentioning in case you decide to re-install from scratch and the Win7 DVD will not boot.
You'll know how to proceed.

Do you Guys see anything wrong or strange in the above screenshots?