Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ram memory issue

22 May 2011   #31
adieitan96

Windows 8 Pro x64
 
 

Hi again, its been a while and i notice to something. when i put the computer to sleep, the memory percent is very low before i turn on the computer for e.g: if i just turned on the computer without doing anything , the memory will be on 27-32 percent and if i turned him on from sleep it will be on 14-15 percent, again without doing anything. what could it be??


My System SpecsSystem Spec
.
22 May 2011   #32
Brink

64-bit Windows 10 Pro
 
 

Hello Adieitan,

This would be normal for this percentage to vary depending on what just happens to be running and what Windows had stored in memory at that time, and is nothing to worry about at those percentages. You can look in the "Memory" tab in Resource Monitor to see exactly what is using memory at the time.
My System SpecsSystem Spec
23 May 2011   #33
adieitan96

Windows 8 Pro x64
 
 

ok thank you
My System SpecsSystem Spec
.

23 May 2011   #34
Brink

64-bit Windows 10 Pro
 
 

You're welcome.
My System SpecsSystem Spec
Reply

 ram memory issue




Thread Tools




Similar help and support threads
Thread Forum
Memory Issue
Hi All I have built a windows 7 pro pc which is 64bit and has 4gb of ram installed along with a nvidia 512mb card installed. The issues I have is in windows it says the pc has 4gb but on 2.75 usable!! Checked the bios and that all say the 4gb installed. Any ideas?
Performance & Maintenance
Memory Speed Issue
Hi guys after installing some new RAM i checked CPU-Z to see if all was ok, and it doesn't seem to be. I bought some Crucial Ballistix 8Gb 1866MHz, however is doesn't seem to be running at 1866 more like 667MHZ. I have a Gigabyte GA-970A-DS3 and a AMD FX-4100 Is there way i can force the...
Hardware & Devices
Msconfig memory issue
Hello guys , Boot > advanced options > maximum memory > i checked and changed it to 4GB After restarting my pc , i reentered to maximum memory and it was 0. I restarted my pc again and it is not working anymore . Status: 0xc000000e Info: The boot selection failed because a required device is...
General Discussion
Memory Error Issue
For about a week, I've been receiving the following error message when I shut down or restart. Application error in shutting down MagicJack. "The instruction at 0X...... referenced memory at 0X..... . The memory could not be read. Click OK to terminate." The referenced memory address changes with...
Hardware & Devices
Bad memory issue
A customer of mine has 2 DIMMs each 1 GB. One of the DIMMs has a bad couple of bit(s) which I discovered with an exhaustive memory test. Its at 08674e7c when both DIMMs are installed using the good DIMM in the first slot. Normally I would replace this, but my client doesn't want to buy a new...
Hardware & Devices
Virtual Memory Issue
Hi Guys, Not sure if this is the correct board to post this problem but here goes; When ever I am trying to open photoshop Iam getting this error... http://i42.tinypic.com/x4g2mo.png Any Help is greatly appreciated.. Thank You
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:03.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App