Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: My High End Workstation dosent work when I install Windows 7 64bit

11 May 2011   #1
Vaibhavk

Windows 7 64 bit
 
 
My High End Workstation dosent work when I install Windows 7 64bit

Hi,

I have the following workstation configuration :

PROCESSOR - Dual (two processors) - Xeon E5520
8M Cache, 2.26 GHz, 5.86 GT/s Intel® QPI

MOTHERBOARD - Intel Workstation board S5520 SC

GRAPHICS CARD
- Palit Nvidia GeForce GTX 275 (986 MB) Dual DVI out

RAM - DDR3 1333 MHz 6 GB (G-Skill)

MONITORS - 2 are connected (Samsung Sync Master 2233 & NEC Accusync LCD 224WXM)

CURRENT OPERATING SYSTEM - Windows XP 64 bit

The problem with the above configuration is that when I try to install Windows 7, the machine freezes (hangs) randomly, I have tried formatting and installing for at-least 4-5 times now but what happens is the setup doesn't work and stops during installation, last time the setup was successful but it hangs the workstation without any reason. I have also tried installing the same CD on other system and it works fine.

Can anybody help me out with the problem!!!!








My System SpecsSystem Spec
.
11 May 2011   #2
SmurofNeves

Seven ultimate 32bit
 
 

Try going threw this tutorial

Hope this system prep does the trick for you

And welcome to the forums.
My System SpecsSystem Spec
Reply

 My High End Workstation dosent work when I install Windows 7 64bit




Thread Tools




Similar help and support threads
Thread Forum
Clean install of a Windows 7 Pro OEM on a second hand workstation
Hi, I bought a second hand HP Workstation. I am going to mess with the partitions and hard drive setup a little, maybe upgrade some drives, so I need an installation media for Windows 7 Pro. The builder in System Information is set to the name of the seller. There is no recovery...
Installation & Setup
Windows won't boot, startup won't work, safe mode dosent work
Today my laptop was working fine but then I shut it down and turned it on again, when I turned it back on, after the Starting Windows and windows logo disappear I get a blue screen for half a second then my computer try's to reboot, I've tried to use startup reapir but u just have a crusor with a...
General Discussion
Building high perfroamnce home workstation - I need an advice!
Hello experts! I am currently running home based W7 Pro x64 based workstation and need to upgrade it to gain more performance. My current setup: Motherboard: Gigabyte GA-MA770-UD3 (supports only SATA2) PCU: AMD Phenom II x4 945 @ 3GHz DRAM: 4 x 2GB @ 800Mhz (Geil) Bootable drive: SSD...
Hardware & Devices
Boot\bcd error, /fixboot dosent work
You've probably had a bunch of people with this same error, however even after looking throgh possibly hundreds of websites, I have still yet to solve it. It's the old windows failed to start because boot\bcd is corrupt please insert the recovery disk. That's what I did and went throgh startup...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 15:18.
Twitter Facebook Google+