Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: New PC

05 Jun 2011   #11


Quote   Quote: Originally Posted by Sean1082 View Post
Thanks for the replies!

As for reverting BIOS to factory defaults, I haven't changed any settings. Any small changes I have made to SATA configuration etc., I have already tried to change back. No luck.
have you loaded optimised defaults? you may not have changed any settings but a bios isn't usually set right without some user input.

usually a double boot means the bios can not perform an action that has been set in the bios and loads default settings to get around it usually an overclock for example but could be something else.

did you make the sata configuration changes after you loaded windows or before? if you made the changes after then your bios is reverting those changes it's self to load the os.

My System SpecsSystem Spec
06 Jun 2011   #12

Windows 7 Ultimate x64

Quote   Quote: Originally Posted by Sean1082 View Post
So, I purchased a new PC and it's running great except for a couple of things. For reference, and to cut down on the size of this post, these are the parts I used for my build.

Problem 1 - When I press the power button to start the PC from being completely powered off, it shuts off briefly about 5 seconds later. Shortly after shutting off, it boots back up again and Windows boots normally. Anyone experience anything like this and have found solutions?

Problem 2 - I am using Intel Smart Response for SSD caching. Every time I start my PC from being completely powered off and log in, Intel Smart Response does not automatically enable. Does anyone have any information for how to get this to auto-enable? I see the system tray icon, however it says it is not running.

Any information would be greatly appreciated.

Problem 2 Try this click on start orb type services click on it when it appears in the list, scroll down the list to Intel Rapid Storage Technology, double click on it and ensure it is set to start Automatically.
As an after thought you may have a second Intel service that I do not have, (something like Intel Smart Response) it would be wise to check that this is also set to auto

Problem 1 I think this may have something to do with Intel Smart Response and suspect it may be normal behaviour, the easy way to find out is to Disable acceleration. as it should then no longer happen

I am guessing so I hope this helps

PS ignore the highlighted part of the pic my thoughts were somewhere else

Attached Thumbnails
New PC-capture.jpg  
Attached Images
New PC-capture1.jpg 
My System SpecsSystem Spec

 New PC

Thread Tools

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 12:33.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App