Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: USB Power Output

10 Apr 2016   #11

Windows 7x64 Home Premium SP1

Quote   Quote: Originally Posted by besty22 View Post
when satting voltages under 1amp it should be written as 500ma not 0.5 or .5
Rubbish. This is an old thread - are you trolling?

I made reference to 500mA and .5A - same thing.
Also what is "satting voltages under 1 amp..." supposed to mean.
Here are some unit symbols that may help you.
Electrical units of measurment (V,A,,W,...)
See A for Ampere (amps), V for volts. You can use the prefix symbol if you like and when sensible. eg. You indeed would probably write 0.001A as 1 mA.

My System SpecsSystem Spec

 USB Power Output

Thread Tools

Similar help and support threads
Thread Forum
Switch between audio output when video output changes
I have an ASUS sound card that has SPDIF out via HDMI and also the standard 3.5mm. I want it to either play from both at once or switch when I switch between displays. Is that possible?
Sound & Audio
Shut down computer, remove all power sources, hold down power button
Why does shutting down the computer, removing the AC Adapter, removing the battery (if it is a laptop), and holding down the power button for 30 seconds fix problems in one's computer. I was recently corrected in a post of mine that this does not actually do anything unless one removes the 3 volt...
Hardware & Devices
Missing power state controls in advanced power plan settings
Hi guys, I'm new here and this is my first post. I have an Optiplex 745 running Windows 7 Professional. Normally in the advanced setting section of the power plan option I have the option to change the power state, however all of a sudden these options have just totally disappeared. Any help is...
General Discussion
Gigabyte HDMI output to Yamaha receiver - no sound output
GA-890GPA-UD3H (rev. 3.1) GIGABYTE - Motherboard - Socket AM3+ - GA-890GPA-UD3H (rev. 3.1) (Note 3) Simultaneous output for DVI-D and HDMI is not supported. What I'm trying to do is output just my sound to the receiver via HDMI cable, but still use the DVI to my monitor...
Sound & Audio

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:47.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App