USB 2.0 running at (?)1.1 speed


  1. charmk
    Posts : 15
    windows 7 ultimate x86 32bit sp1
       New #1

    USB 2.0 running at (?)1.1 speed


    Hi.
    When I connect my external hdd, it tells me that this device could work faster if I connect it to a Hi-Speed USB port. When I try to copy any files, transfer starts at about 70mb/s and stops after a few seconds, time left is «calculating» and when it starts again the speed is about 1.5mb/s. Sometimes pc doesn't find the hdd at all.

    I've installed the latest chipset drivers but nothing new happened.
    How it could be fixed?
      My Computer
    Quote Quote

  3. seth500
    Posts : 968
    Windows 7 Ultimate x64
       New #2

    Hi charmk,

    Go to Gigabytes website and search for the exact model of your motherboard and look and see specifically if there are drivers for your usb serial bus controllers and install them.

    Seth
      My Computer
    Quote Quote

  4. DeaconFrost
    Posts : 5,795
    Windows 7 Ultimate x64 SP1
       New #3

    It is possible that your motherboard has separate drivers for the USB ports.
      My Computer
    Quote Quote

 

  Related Discussions
ok, the specs on my motherboard from MSI say this here: MSI Global ? Mainboard - 790FX-GD70 ill attach an image. the board says DDR3 800/1066/1333/1600*/1800*/2133* (OC) DRAM, 16GB Max. i'm using the program Speccy and it says my ram is PC3-12800j so it should be running at 1600mhz... but...
Alright, so I installed CPU-Z and I'm unsure to know what my ram is actually being clocked at. It shows that the DRAM Frequency is 933.4 MHz which should equal up to about 1866 MHz which is what the ram is defaulted to, but then when I go over to the SPD section it shows the max bandwidth is at...
Friends this has nothing to do with which os, to my understanding, but I posted this on lesser forums and stumped everyone. I predict that will not happen on this forum! In theory my 'project' notebook, having i945GM chipset, is supposed to run the memory bus at either/or 266MHz or 333MHz. I...
Desktop running on speed!
in BSOD Help and Support

Don't know if this is the right place to post this, but please direct me to the right place if not. My desktop appears to be runing on speed! I switched it on, and that startup screen with the four coloured windows logo, is flashing like mad. The next screen I get is the password screen. ...
after dealing with PCI usb hub. i went and got external usb hubs and yes it worked on windows 7, but only FULL speed, my cam went from fast to laggie, iphone connect to usb hub had a message " it can perform faster if connect to a high speed port" , i check under device manager and it says " the...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 21:14.
Find Us