Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Show us your SSD performance

20 Sep 2011   #2171
HugeRaven

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by essenbe View Post
Quote   Quote: Originally Posted by HugeRaven View Post
Quote   Quote: Originally Posted by Hopalong X View Post
If you know the Marvell is installed then uninstall it. No Snip necessary.

If by chance the Marvell is re installed on reboot then you will need to delete the Marvell driver not uninstall.
If Marvell driver is deleted then Windows will auto install the MSAHCI since the Marvell is no longer available.

No you are not risking the system.

I'm confirming what Essenbe posted- I think!!????
How do i manually delete the Marvell driver then if it gets reinstalled automatically when restarting?
Before you do anything, I would like to see a screenshot of As SSD. Do not run the test, just select the SSD at the top and take a screenshot. But, to uninstall the Marvell driver, open device manager and expand IDE/ATA/AHCI drivers, at the bottom you will see the ahci drivers. If the Marvell driver is listed, right click it and select properties, click on the drivers tab, at the bottom you will see a button that says uninstall. click that buttin and click yes to all of the warnings. But first let us see the As SSD screenshot.
Now i have done two screenshots, one in AS SSD and one from my Device Manager so you guys can see what drivers are installed. Okey here they are:
Show us your SSD performance-ssd_driver_mvs91xx.jpg

Show us your SSD performance-device_manager.jpg

Waiting for your respons




My System SpecsSystem Spec
.
20 Sep 2011   #2172
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Try this first. In device manager expand disk drives and right click your SSD and select properties. select the driver tab and click on the roll back driver button. reboot and post a shot of As SSD.
My System SpecsSystem Spec
20 Sep 2011   #2173
HugeRaven

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by essenbe View Post
Try this first. In device manager expand disk drives and right click your SSD and select properties. select the driver tab and click on the roll back driver button. reboot and post a shot of As SSD.
I tried it but the button to do a rollback is faded and i cant click it. See attached picture

Show us your SSD performance-properties_of_ssd.jpg


My System SpecsSystem Spec
.

20 Sep 2011   #2174
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I've never done this, so I am not sure what will happen, but there should be no damage to the computer. 1st, click on update driver and check online. after that is done (don't install it if it finds one), see if the roll back driver is available. If so, click on it. Otherwise the only option I know is to uninstall the marvell driver.
My System SpecsSystem Spec
20 Sep 2011   #2175
HugeRaven

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by essenbe View Post
Try this first. In device manager expand disk drives and right click your SSD and select properties. select the driver tab and click on the roll back driver button. reboot and post a shot of As SSD.
When uninstalling the driver, should i also uninstall the "Marvel RAID Console"?
My System SpecsSystem Spec
20 Sep 2011   #2176
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

probably unless you intend on using raid on the Marvell ports.
My System SpecsSystem Spec
20 Sep 2011   #2177
HugeRaven

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by essenbe View Post
probably unless you intend on using raid on the Marvell ports.
Okey then, here i go... keep your fingers crossed... be back in a while *i hope*
My System SpecsSystem Spec
20 Sep 2011   #2178
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If you installed in ahci mode in bios without loading drivers, the msahci drivers should have installed then. When you installed the Marvell drivers, they replaced the msahci driver. What we are trying to do is get back to the msahci driver for your SSD.
My System SpecsSystem Spec
20 Sep 2011   #2179
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

HugeRaven, where are you?
My System SpecsSystem Spec
20 Sep 2011   #2180
HugeRaven

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by essenbe View Post
HugeRaven, where are you?
I´m back

It wasnt as easy as that. When i uninstalled the Marvell driver as you guys said it automatically installed it self again. I tried it 2 times without success then i got thinking and then it came to me that perhaps it was in the "Add & Remove Program" in the controllpanel. So i checked it and what do you know, there it was. So i uninstalled the driver, checked in the Device Manager and it was gone then restarted.

Wipz... no more Marvell in the Device Manager then i opened AS SSD and yepp it said "MSAHCI - OK"
See pic:

Show us your SSD performance-ssd_driver_msahci.jpg

Then i opened ATTO Disk bench and made a run for it. Turned out pretty good, see pic:
Show us your SSD performance-atto_disk_bench_msahci.jpg

and before with Marvell Drv it was:

Show us your SSD performance-atto-ssd-bench-marvell-drv.png

What do you guys think?

Should i try IRST for more speed?


My System SpecsSystem Spec
Closed Thread

 Show us your SSD performance




Thread Tools




Similar help and support threads
Thread Forum
Show us your SSD performance 2
Continued from: https://www.sevenforums.com/hardware-devices/18229-show-us-your-ssd-performance.html Benchmark Program Links: AS SSD Benchmark OR AS SSD Benchmark Download - Softpedia
Hardware & Devices
Show us your hard drive performance
I thought it would be interesting to compare everyones hard drive performances with screenshots from HD Tune utility (get from HD Tune). Maybe after some time we could produce a results table. So heres mine: Im going to show you the single WD Raptor X results first for interest: ...
Hardware & Devices
SSD show low performance
I bought a Samsung 840 EVO120Gb which is showing a very disappointing performance. My system is the following: Windows 7 Ultimate x64 Asus P7P55 WS GSkill 12gb Intel i5 760 2.8Ghz 4x Nvidia Quadro NVS 290
Performance & Maintenance
HDDs Show in BIOS, But Do Not Show in Disk Management
Hello, A newbie here that just completed a first-time new Win7 PC build. Successful installation of Win7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage. ...
Hardware & Devices
Show us your Mechanical HDD performance...
Since the SSD boys and girls have a "Show us your SSD Performance" thread, I thought I'd start one for us mechanical HDD owners. Simply DL, install, and run HD Tune and post screenshots of results here in this thread. Please also tell us the Make and Model of your HDD(s) and any other specs you...
Hardware & Devices
show hidden folders show file extensions thru registry
I am trying to setup a default user or machine setup for how win7 handles folder view options. I want show hidden folders to be set to on for all users and the hide extensions for know file types to be unchecked or turned off ffor all users (so extensions show) I have located them in the registry...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:32.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App