Yes that's exactly what I used, I have tried before using AHCI in the Bios but it never worked then i came across your post this morning and I thought I would give it a go and Bingo sucess :)
Many Thanks for the great tutorial :)
How ever my Rig has gone back to the Manufacturer today as it keeps overheating and I have just spent 12 hours getting my old one working
Steve
Last edited by steve-pressman; 01 Jul 2010 at 14:06.
Yes that's exactly what I used, I have tried before using AHCI in the Bios but it never worked then i came across your post this morning and I thought I would give it a go and Bingo sucess :)
Many Thanks for the great tutorial :)
How ever my Rig has gone back to the Manafacyurer today as it keeps overheating and I have just spent 12 hours getting my old one working
Steve
Well, good news and bad; I'm pleased the tutorials are a help and I hope they sort the issue quickly for you.
Hope you get a quick return.Yes that's exactly what I used, I have tried before using AHCI in the Bios but it never worked then i came across your post this morning and I thought I would give it a go and Bingo sucess :)
Many Thanks for the great tutorial :)
How ever my Rig has gone back to the Manafacyurer today as it keeps overheating and I have just spent 12 hours getting my old one working
Steve
It's gotta be hard to lose your nice new computer, even for a few days
Got a Txt message this morning to say the rig had arrived and that they were checking could take 3-5 working days 3 Hours later get another Txt message to say the fault has been found repaired and they will send the Rig out to me tonight so I should get it back tomorrow hopefully That's what I call great service
Thing that bothers me is I asked them to run the Prime test on it but in the 4 hours they had it they could not have stressed it that much, maybe they didn't need to as they seemed to have found what was wrong, needless to say when I get it back the first thing I will be doing is stress testing it with Prime to see how the numbers look. All in all I am happy with their service though.
Just as a foot note, I am using my old Rig again, it is bringing to light all the old problems I had with it and Win 7 sound, lag etc, makes me appreciate my new baby all the more and how well it all works together apart from running hot it is an awesome machine
Steve
Congrats on the good news
That is really good service, commendable.
Good plan to run prime95 test, make sure it's been repaired correctly.
Heat is not your friend.
Let us know how it's running.
..yet another OCZ Series1 SSD failure..
..yet another RMA..
- guarantee should ensure an updated replacement..
- but, drat!!
only 2nd..
- but it had my fave games on it - just a big nuisance..
HD Tune Pro: INTEL SSDSA2M160G2GC Benchmark
Test capacity: full
Read transfer rate
...Transfer Rate Minimum : 162.7 MB/s
Transfer Rate Maximum : 232.7 MB/s
Transfer Rate Average : 227.9 MB/s
Access Time : 0.1 ms
Burst Rate : 195.8 MB/s
CPU Usage : 1.5%
