RAM Timings

Page 3 of 4 FirstFirst 1234 LastLast

  1. Posts : 119
    Windows 7 x64
    Thread Starter
       #21

    Ok I upped DRAM to 1.65, this is a report on my Patriot PSD32G16002 2GB(x2) 12800 1600MHZ CL9
      My Computer


  2. Posts : 1,996
    Windows 7 Home Premium 64 bit
       #22

    CPU-Z reports that your RAM is running at 800 MHZ per stick which is 1600 MHz.
      My Computer


  3. Posts : 119
    Windows 7 x64
    Thread Starter
       #23

    Heres a report on Sektor 5 (DRAM 1.65, timings @ 9-9-9-24 in BIOS)




    -----------

    looking forward to replies

    thanks
      My Computer


  4. Posts : 119
    Windows 7 x64
    Thread Starter
       #24

    p5bdkw said:
    CPU-Z reports that your RAM is running at 800 MHZ per stick which is 1600 MHz.
    Shouldn't each 2GB stick be running at 1600mhz? Or am I mistaken??
    Is this how 99% of everyone running 1600mhz Ram CPUZ report should look like? @ 800mhz each.
      My Computer


  5. Posts : 26,869
    Windows 11 Pro
       #25

    Read post #20 and #22
      My Computer


  6. Posts : 1,996
    Windows 7 Home Premium 64 bit
       #26

    No, each stick runs at half of what the stated rate (1600) is.
    That's why is called DDR (double data rate).
      My Computer


  7. Posts : 119
    Windows 7 x64
    Thread Starter
       #27

    Ok, My latest CPUZ states these Sektor Sticks are running at 1600mhz.
    In my SPD section Max Bandwith is (533MHZ) (My PSD32G1600 sticks state Max Bandwith is 1600mhz)

    Can I conclude these Sektor5 sticks are running at 1600mhz as were my Patriot sticks?
      My Computer


  8. Posts : 119
    Windows 7 x64
    Thread Starter
       #28

    Britton30 said:
    Do this, Remove the 1066MHz sticks and see what you get. Put them in a drawer. Buy 2 more 1600MHz indentical to what you now have, put them in.
    In BIOS set CPU NB FREQ to X11
    CPU FREQ 200
    Mem clock/Manual, X8
    Should I keep the Sektor 5 sticks (If they're running correctly at DRAM 1.65) and use them with my PSD32G1600?, Or do you suggest I change over to Identical sticks?

    manolz
      My Computer


  9. Posts : 119
    Windows 7 x64
    Thread Starter
       #29

    And in saying that, if I were to switch to identical sticks at 8gb, should I keep the PSD32G or Sektor5?
    Any advice welcome thanks
      My Computer


  10. Posts : 119
    Windows 7 x64
    Thread Starter
       #30

    ok, so even though my max bandwith on these sektor5 are capped at 533mhz

    there still running at 1600mhz, as stated here



    correct?

    and my psd32g sticks are running at 1600mhz
    as stated here


    can anyone confirm this?, i'm going to go for identical sticks (unless these 2 different modules can run side by side at 1600mhz)
    thanks
      My Computer


 
Page 3 of 4 FirstFirst 1234 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:55.
Find Us