Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: RAM Timings

30 Aug 2011   #31
manolz

Windows 7 x64
 
 

http://forums.whirlpool.net.au/forum....cfm?t=1765231

,,


My System SpecsSystem Spec
.
30 Aug 2011   #32
DeaconFrost

Windows 7 Ultimate x64 SP1
 
 

It hasn't been said so far, but you are putting in an amazing amount of worry into something that will have nearly zero measurable affect in performance. If the system is running fine now and is stable, don't worry about it. Even if your memory was running a little slower, you honestly wouldn't ever know. Save your money and enjoy your system.
My System SpecsSystem Spec
30 Aug 2011   #33
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
 
 

Enjoy your computer just like DeaconFrost has suggested.
My System SpecsSystem Spec
.

31 Aug 2011   #34
manolz

Windows 7 x64
 
 

thanks for the support and replies
appreciate it
Manolz
My System SpecsSystem Spec
31 Aug 2011   #35
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

You're quite welcome. :)
My System SpecsSystem Spec
Reply

 RAM Timings




Thread Tools




Similar help and support threads
Thread Forum
Ram timings
I have two matched pairs of 1600MHz RAM the G Skill is an 8 8 8 24 (8GB) and the Patriot is 9 9 9 24 (8GB) timings is it ok to run these sticks as an all up 16GB of RAM?? or will I have conflicts??
Hardware & Devices
not sure about ram timings
hi all. this is the ram im using 8Ghz 2x4 corsair CMX8GX3M2A1600C9. everywhere ive looked online says the speed is 1600 timings 9-9-9-24. but looking at my speeds n timings mine is runnin at 1066 7-7-7-20. is this just down to my mobo? should i change it and would there b any noticeable increase...
PC Custom Builds and Overclocking
i7 920 Ram Timings
Hi, I have a set of 6gb (3x2gb) corsair xms 3 @ 1333mhz which are currently by default running at 1066 mhz. My CPU is Intel i7 920 currently at stock (2.66Ghz) If I just arrange the timings from the bios will it cause any problems / damage ? Are the timings related to the cpu clock ? Thanks
PC Custom Builds and Overclocking
timings for ram help
Hi i have 4gb kingston 800 ram set 2x2gb.the timings in bios are 6-5-5-17 .24 clocks. Are these good timings and can i tighten them with no damage to the ram. I can send them back as i had 3gb at 5-4-4 . the performance with this 4gb set seems not as good as the 3gb set ,this is on my second...
PC Custom Builds and Overclocking
ram timings
hello all, i just completed my first build and used corsair ram with a 7-7-7-20 latency. in cpu-z it says i have a 8-8-8-20 latency. whats up with that? second question, per my hardware in my profile, would i benefit greatly to build a raid 0?
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:37.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App