New
#1
Smoke and Hardware
I am sure at least a couple of people here are going to have some experience with hardware that has been in a fire. Maybe you know someone who salvaged some hardware from a machine that was in a mild house fire or maybe a business burned and they had hardware that could potentially be saved. Whatever the case may be.
I had a friend who acquired some hardware that had been in a house fire. Some of the stuff worked fine some of it not at all. But I have a lesson about hardware that has gone through a fire.
One of the pieces of hardware that we were using was a 9800 gt graphics card. That card went through the fire mentioned above. The card ran fine the first few times we used it. But the other day I put it on a board while testing and I leaned over to touch the pins and start the board up and as soon as I did the card burned up violently about 4 inches from my face.
I checked out the card once all the blue spots in my vision cleared up and that is when I noticed something very important.
When hardware goes through a fire and is exposed to smoke it is damaged. It doesn't take heat or even excessive amounts of smoke to cause this damage. The reason why is because the smoke is highly acidic and the residue it leaves behind on the hardware causes everything to corrode. It might take a couple days or a couple of weeks for the corrosion to finally show and be a serious issue but it will happen and how fast depends on the amount of residue left by the smoke and just how acidic the smoke was. Once it corrodes heavily enough and you put power to it POOF.
So remember that if you ever deal with hardware that has gone through a fire even if the fire was pretty mild if the hardware was exposed to smoke at all it is probably only a matter of time.