Hard Drive is not detected in the BIOS

Page 2 of 2 FirstFirst 12

  1. Posts : 141
    Windows 7 Ultimate x64
    Thread Starter
       #11

    I have comfirmed that the Hard Drive is in fact, dead. I have tested it in my Dell Inspiron 1545 and my computer didn't detect it at all.

    I'd like to thank everyone who has posted in this thread and I will award everyone with Rep for doing so.

    This thread will be marked as solved shortly.

    Again, thank you everyone for your help.

    Sidenote: I still don't know why Ubuntu and Windows detected the HDD fully but the BIOS didn't. All I know now is that the Hard Drive is gone, dead, finished.

    It'd be a real shame if my HDD was to fail on my current computer (Inspiron 1545). Any ways of preventing this? This'll be the last question I ask.

    Thanks!!

    EDIT: Does running the occasional CHKDSK prevent it from failing? I know all HDD's fail, but I want mine to last its longest and get the best out of it.
      My Computer


  2. Posts : 7,730
    Windows 7 Ultimate SP1 64-Bit
       #12

    Sorry to hear about the hard drive failure, but the fact is they can give up at any time. I've recently replaced one on a computer that is less than six months old.

    CHKDSK won't prevent a drive failing, but it will give a warning of impending problems, as will unusual clicking noises as the platter spins.

    Your best defence against a hard drive failure is regular backups to an external hard drive, network, online or even DVDs or a combination of all of them as you can rest assured the day you don't do backups something will go wrong.

    Thanks for posting back Ishmael, it's appreciated.
      My Computer


  3. Posts : 640
    Microsoft Windows 7 Home Premium SP1 64-bit Build 7600
       #13

    seavixen32 said:
    CHKDSK won't prevent a drive failing, but it will give a warning of impending problems, as will unusual clicking noises as the platter spins.
    OMG... OMG... please say no... sometimes, when working on my laptop, I hear a click from the touch pad (below, there is the HD, a Western Digital one...) it only happens once, and not daily, sometimes twice, and last year, I got freezing problems using the AMD SATA driver, which was reduced (it almost never happens now) by not installing the driver on a wiped instalation of Windows 7... anyway I feel that the whole system is not as fast as it should be (my lap specs are on my sig)... is my HDD dying? Forgot to emntion that I Used HDD Regenerator 1.7 and it didn't find any bad sectors...

    I'm surprised how many times OEM vendors use hardware that fails at a very short range of time (my lap is only 1 year old...) vs assembled PC's, for example, my desktop HDD is more than 2 years old, and it stays as fast and healthy as the first day...

    Well... I hope my lap is not needing a new HDD, otherwise, I'll need to start looking for a new one (Seagate... SEAGATE!!!!)

    See ya!!!
      My Computer


  4. Posts : 2
    Windows 7 Home premium 64bit
       #14

    Similar issue


    I have an Acer Aspire X3400 that has a very strange problem, as both AHCI 1 & 4 (which are my HDD and DVD drive) are showing as not detected, i have tried both drives in a different pc and they are working fine so i know they are not failing, i think this fault may lie with the BIOS which i have noticed when i make a change from AHCI to native IDE then do a cold boot the BIOS has reseted back to the default which is AHCI.

    I have considered flashing the BIOS but not sure if this will make any difference.

    I have also checked all the standard stuff like cables, cards are inserted correctly and memory however i am drawing a blank as to what could be the problem.

    Thanks in advance
      My Computer


  5. Posts : 3
    Windows 7 home premium 64bit
       #15

    Similar issue


    Yesterday my Wife's laptop stopped booting for her so I started to troubleshoot it.

    What I've discovered is:

    - If the BIOS setting for the hard drive controller is AHCI it will not recognize the drive. (This was the default setting in the BIOS)

    - If changed to IDE mode it recognizes the drive but come up with an "No operating system detected" message.

    - If the hard drive is installed in a second lap top it works fine.

    - If another hard drive is installed it works fine in AHCI mode.

    Only the combination of the original hard drive and the original lap top wont work.

    Am I missing something?

    Sean
      My Computer


  6. Posts : 4,751
    Windows 7 Home Premium 32-Bit - Build 7600 SP1
       #16

    northernsmith said:
    Yesterday my Wife's laptop stopped booting for her so I started to troubleshoot it.

    What I've discovered is:

    - If the BIOS setting for the hard drive controller is AHCI it will not recognize the drive. (This was the default setting in the BIOS)

    - If changed to IDE mode it recognizes the drive but come up with an "No operating system detected" message.

    - If the hard drive is installed in a second lap top it works fine.

    - If another hard drive is installed it works fine in AHCI mode.

    Only the combination of the original hard drive and the original lap top wont work.

    Am I missing something?

    Sean
    Hi -- Welcome to the Forum. You will have a lot more luck if you start your own thread. Working with two problems on one thread is rather confusing. Thanks,
      My Computer


 
Page 2 of 2 FirstFirst 12

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:13.
Find Us