Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: No Bios after installing Windows 7

27 Sep 2011   #1
tekle

win7
 
 
No Bios after installing Windows 7

hello please help. well I had windows XP, and I updated it on windows 7,during installation I did not formatted C disk. and installed win 7 on C disk. windows created (windows old) folder on c disk. The installation process ended succesfully. but the crach come after it. when i tried to turn on my computer, on screen, there appeared such massage: The bios could not installed, please press "g" . it seems i have no bios. please help me, may it be of the reason, that I didnot formatted C disk?


My System SpecsSystem Spec
.
27 Sep 2011   #2
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

What can you do after pressing "g"?

did you Check your PC with the Upgrade Advisor first?

Download Details - Microsoft Download Center - Windows 7 Upgrade Advisor


For better help with problems, Can you post your specs.
Filling out System Specs
System Info - See Your System Specs

Dont Know What Hardware You Have..??
VistaForums SysInfo Tool - Vista Forums
My System SpecsSystem Spec
27 Sep 2011   #3
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Also, is this the complete message? :

Hardware initiate failed, please check device!!! The BIOS does not be installed. Press <g> to continue"


This has been reported to be an error message on some systems where a SATA I device is installed on a SATA II port.

You system specs, including the brand and model number of that hard drive is very important.

Also note if you changed anything in the system (hardware) before installing W7.
My System SpecsSystem Spec
.

Reply

 No Bios after installing Windows 7




Thread Tools




Similar help and support threads
Thread Forum
Help with BIOS settings prior to installing OS
I have a Vista Home Premium SP2 32-bit computer. I am going to attempt to do a clean install of Windows 7 on this computer. The reason I'm not trying an in-place upgrade is because system has been running too poorly lately and I think I need a fresh install. I'll be using a Windows 7 OEM DVD...
General Discussion
BSOD Installing new BIOS update FFFFF880099005C4
I just installed new bios drivers, everything is fine but when the computer restarts the only bootable device is my second hard drive that I use for storage only. I choose this as my SSD (windows installed on) is not shown, I get this error when I start the computer, can't remember what it said...
BSOD Help and Support
ASUS M2R32-MVP - can't get into bios after installing 8gb of memory
Runnin windows 7 64, when I install 8gb's of ram the bios will crash and wont let me reinstall via Crashfree bios3 using usb, I'm using a RAID 0 with 2 hard drives, please help, thanks
Performance & Maintenance
Installing on Aspire One SDHC - NO BIOS SUPPORT
Long story short i have an Aspire One ZG5 with no SSD ribbon. Someone ripped out the ribbon and in the process damaged the connectors on both drive and motherboard. Any attempts to restore them were useless, even with a hot air rework station i could not solder new connectors in properly, they...
Installation & Setup
Sticking on bios after installing Windows 7
hi there, im installing windows 7 on my PC its, Intel DG41NJ ITX Motherboard Intel Celeron E1500 2x 1GB ddr2 ram 1.5tb samsung HDD Samsung DVD/rw
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:43.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App