Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Something very wrong with Corsair Vengance Timings

23 Nov 2011   #11
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

Well, you now know that there is nothing wrong with your RAM.

Continue to study.

Try that XMP profile and then run CPU-Z and see what the settings display--see how they are different from the pic you posted.

Try a post in the overclocker's section.

Overclocking is much easier than it used to be. Look for a recent post from Wishmaster in the overclocking and cases section. He has experience and I think he just got a new 2700K and overclocked it.

https://www.sevenforums.com/overclock...-new-case.html


My System SpecsSystem Spec
.
23 Nov 2011   #12
Tomha

Windows 7 Professional 64bit
 
 

Ok, this is with the XMP profile:

Original:


XMP:



I got a 2gb/s improvement, and yet nothing seems to have changed.
My System SpecsSystem Spec
23 Nov 2011   #13
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

I don't know whether or not the fact that you are actually using the XMP profile is necessarily reflected in CPU-Z.

I would assume that your RAM timings are now as shown in the last column, under "XMP-1600"--the same as 666/1333 other than the tRC.
My System SpecsSystem Spec
.

23 Nov 2011   #14
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

The SPD tab is read from the ram and shows the different settings it will support. The memory tab shows what it is running at. You have to go into bios and set XMP profile for it to run at the XMP settings.
My System SpecsSystem Spec
23 Nov 2011   #15
Tomha

Windows 7 Professional 64bit
 
 

I did
My System SpecsSystem Spec
23 Nov 2011   #16
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Quote   Quote: Originally Posted by Tomha View Post
I did
Then what does the memory tab say?
My System SpecsSystem Spec
24 Nov 2011   #17
Tomha

Windows 7 Professional 64bit
 
 

Oh I see, memory says timings are 9-9-9-24 and the frequency is 798mhz, that's better :) Makes me want to look into over clocking though, given the speeds Im getting.
My System SpecsSystem Spec
24 Nov 2011   #18
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Please mark the thread solved.
My System SpecsSystem Spec
Reply

 Something very wrong with Corsair Vengance Timings




Thread Tools




Similar help and support threads
Thread Forum
i7 920 Ram Timings
Hi, I have a set of 6gb (3x2gb) corsair xms 3 @ 1333mhz which are currently by default running at 1066 mhz. My CPU is Intel i7 920 currently at stock (2.66Ghz) If I just arrange the timings from the bios will it cause any problems / damage ? Are the timings related to the cpu clock ? Thanks
PC Custom Builds and Overclocking
timings for ram help
Hi i have 4gb kingston 800 ram set 2x2gb.the timings in bios are 6-5-5-17 .24 clocks. Are these good timings and can i tighten them with no damage to the ram. I can send them back as i had 3gb at 5-4-4 . the performance with this 4gb set seems not as good as the 3gb set ,this is on my second...
PC Custom Builds and Overclocking
ram timings
hello all, i just completed my first build and used corsair ram with a 7-7-7-20 latency. in cpu-z it says i have a 8-8-8-20 latency. whats up with that? second question, per my hardware in my profile, would i benefit greatly to build a raid 0?
Performance & Maintenance
Corsair Nova V128 SSD is so slow - whats wrong?
Hello, I have a problem with my new Nova V128 GB and I donít know whatís wrong with this drive. Cut to the chase: In HD Tune Pro Iíve sooo low score: http://img193.imageshack.us/img193/2638/dysk1t.jpg http://img36.imageshack.us/img36/32/dysk2p.jpg
Hardware & Devices
BSOD is back with a vengance!
It would occur frequently a few months ago.....then it hadnt happened for a bit and now its starting to come back again I have attached my mini dump files thank you in advance to anyone who can help
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:35.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App