Upgrading old computer - Which memory to choose?

Ok, so I installed the 3 < 1GB memory sticks and it looks like it worked.

I do have an error in Siw where in the Memory Summary section it says

Property Value
ELIZA (VIA Technologies, Inc. P4X400-8235)
Memory Summary Reported by BIOS
Warning! Wrong values reported by BIOS
Maximum Capacity 768 MBytes [Wrong value reported by BIOS]
Maximum Memory Module Size 32 MBytes
Memory Slots 3
Error Correction None
DRAM Frequency 133.2 MHz
Memory Timings 3-3-3-6 (CL-RCD-RP-RAS)

Device Locator Slot 1
Manufacturer Micron Technology
Part Number 16VDDT12864AY40BF2
Serial Number D37AD42B
Capacity 1024 MBytes
Memory Type DDR (PC3200)
Speed 200 MHz
Supported Frequencies 133.3 MHz, 166.7 MHz, 200.0 MHz
Memory Timings 2-2-2-6-0 at 133.3 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 2-3-3-7-0 at 166.7 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 3-3-3-8-0 at 200.0 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Data Width 64 bits
EPP SPD Support No
XMP SPD Support No
Device Locator Slot 2
Manufacturer Micron Technology
Part Number 16VDDT12864AY40BF2
Serial Number D37AD40C
Capacity 1024 MBytes
Memory Type DDR (PC3200)
Speed 200 MHz
Supported Frequencies 133.3 MHz, 166.7 MHz, 200.0 MHz
Memory Timings 2-2-2-6-0 at 133.3 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 2-3-3-7-0 at 166.7 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 3-3-3-8-0 at 200.0 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Data Width 64 bits
EPP SPD Support No
XMP SPD Support No
Device Locator Slot 3
Manufacturer Micron Technology
Part Number 16VDDT12864AY40BF2
Serial Number D37AD408
Capacity 1024 MBytes
Memory Type DDR (PC3200)
Speed 200 MHz
Supported Frequencies 133.3 MHz, 166.7 MHz, 200.0 MHz
Memory Timings 2-2-2-6-0 at 133.3 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 2-3-3-7-0 at 166.7 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 3-3-3-8-0 at 200.0 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Data Width 64 bits
EPP SPD Support No
XMP SPD Support No

I have looked in the BIOS but I can't find any value about Max Capacity or Max Memory Module Size

Is this something I need to worry about or not?

// Anders

I have run CPU-Z and saved the result to a file (since I don't understand most of it). I attach the file

An other thing (you have to tell me if I should start a new thread)

I changed some values in the BIOS setup (Which I know was kind of bold of me...)

DRAM Timing: Was manual but I changed it to By SPD

DRAM Clock: Was 133 MHz and I thought since the memory are 200 MHz I should use that. But then the computer froze at Verifying DMI Pool Data. If I change it to 166 MHz it works

Ok, I did reset the values and reentered where I thought the should be the old values.
Siw still reports that BIOS is reporting the wrong value, but I can live with it

A big thank you to all that have donated there knowledge and time to help me with this!

// Anders