Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Plug-in Module H?

30 Dec 2011   #1
Tim91

 
 
Plug-in Module H?

What does this mean? Plug-in Module H on a Western Digital HDD?


My System SpecsSystem Spec
.
30 Dec 2011   #2
bassfisher6522

Windows 7 Ultimate 64 bit
 
 

My System SpecsSystem Spec
Reply

 Plug-in Module H?




Thread Tools




Similar help and support threads
Thread Forum
The print spooler failed to load a plug-in module - Error Code 0xc1
I have noticed a strange error in Event Viewer relating to printing. Every time I print a document two identical errors are produced in the Event Viewer as below:- The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\E_IUICHQE.D​LL, error code 0xc1. See...
Performance & Maintenance
Plug in GTX 260, hooked up one 6 pin power plug, motherboard wont post
I verified the PSU is good. I removed all drives, all cards, even memory. All the fans spin for a moment then nothing they stop. I assume the MB is now destroyed? A GTX 260 has two 6 pin power connectors, since the PSU only had one 6 pin power connector, I thought to try it. MB is Asus P5QC...
Hardware & Devices
Seagate back up plus 1 tb reloads when I plug in or plug out the power
I have an external hard drive Seagate backup plus 1 tb working fine with Sony vaio E15136 win 8.1 64 bit 4gb Ram. As long as I change the power supply i.e either plug in or plug out the power supply of my laptop, external drive is re-detected. The external drive draws power from laptop.No external...
Hardware & Devices
Can we not just plug/un-plug USB 3.0 drives like we did with 2.0?
Hello all I could really tell a long story here of all the issues I have been dealing with and could provide if requested, but to make this a bit shorter, can we now not just plug and unplug a USB 3.0 drive like we used to with 2.0? All in all I seem to have really screwed up the...
General Discussion
8GB Ram Module very hot to touch
Hi Dual Xeon Win Ult 64 bit I have 2 8GB Ram Modules installed properly. Same make and type etc, They are very hot to the touch. I ran HWMonitor Pro which displays the temperature
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:23.
Twitter Facebook Google+