Show us your SSD performance 2

To check trim open an elevated command prompt and thter this command fsutil behavior query disabledeletenotify
It will return - DisableDeleteNotify = 1 (Windows TRIM commands are disabled) or
DisableDeleteNotify = 0 (Windows TRIM commands are enabled)

The only issue is that will tell you if the Operating system is sending trim commands to the sata controller, it won't tell you if the controller is using those commands. We know the Intel controllers do, but there is a lot of speculation of whether the Marvel controllers do. I guess, time will tell.

chrysalis said:

So I want to use marvell but the crunch point is if trim will work on it. Also slightly annoyed that I will have to have my graphics card pcie at 8x instead of 16x as well, but if I am right my geforce 460GT should still run at full speed with that spec.

Use the Samsung SSD Magician toolbox and run TRIM when you want.

I clean all my temp files every few days and run the TRIM command through Magician every 7-14 days.

Can be found here under Manual and Downloads> software tab> Magician software (v3.1)> http://www.samsung.com/us/support/ow.../MZ-7PC128D/AM

chrysalis said:

ok so manual trim will work even if the controller doesnt pass on the auto trim thats good to know, thanks.

Yup.

Of course the Samsung Magician only works on Samsungs.

The same is true of the Intel toolbox. You need to match the proper toolbox to the Intel model SSD.

Hi Guys, so I received my 128GB Vertex 4 in the post today.
Just finished setting it up with a clean install so I figured you would like to see how it runs in the regular benchmarks.:)

paulpicks21 said:

Hi Guys, so I received my 128GB Vertex 4 in the post today.
Just finished setting it up with a clean install so I figured you would like to see how it runs in the regular benchmarks.:)

Those numbers look terrible.

Terribly good.

RMA it back it works too good.

paulpicks21 said:

Hi Guys, so I received my 128GB Vertex 4 in the post today.
Just finished setting it up with a clean install so I figured you would like to see how it runs in the regular benchmarks.:)

Great numbers Paul. A Guy

Nice scores, Paul. Those are good numbers. well done.

Fantastic Paul!
I think I need to get mine on msahci instead of iaStor?
I didn't run this, just info.