Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: is my ram running at the right speed?

26 Feb 2012   #41

windows 7 64bit on both

nice! thanks for the explanation prof! i think i get it now

My System SpecsSystem Spec
26 Feb 2012   #42

Windows 10 Pro/ Windows 10 Pro Insider

Also, and I don't have a link, AMD stated that running ram faster than specs can damage the memory controller. Now, before this rig I had a Phenom II X6 and ran the ram at 1600 and it didn't damage anything and there are millions of people who do the same thing. I am sure that out of those millions, a few have damaged the memory controller, but I suspect very few. But, it should be obvious that anytime you run anything faster than it was designed to run, it is putting extra wear and strain on that and other components. Perhaps the best advice I ever got on the subject came from these forums. If you are not willing to replace it, don't overclock it. Now, do I overclock my ram, yes and the CPU too. I just think you should realize that there is a risk involved. If you are willing to take that risk and know/ and understand the techniques to do it, go for it.
My System SpecsSystem Spec
26 Feb 2012   #43

Windows 10 Pro/ Windows 10 Pro Insider

Very good explanation prof., I'd rep you if I could.
My System SpecsSystem Spec

26 Feb 2012   #44

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2

Quote   Quote: Originally Posted by essenbe View Post
Very good explanation prof., I'd rep you if I could.
I'd rep you for your words of caution, too. It is quite important to understand that with the benefits there is some risk involved as well. :)
My System SpecsSystem Spec
27 Feb 2012   #45

Windows 7 Home 64bit

I need to correct a misstatement in one of my earlier posts, where I said that the only Phenom IIs capable of running RAM at 1600MHz+ were those with C3 steppings. The IMCs on C3 steppings provided 1333MHz support when all four DIMM slots were populated. The C2 steppings would throttle the RAM frequency back to 1066MHz when all four slots were populated.

The C3 is definitely the better overclocker.

AMD Phenom II X4 965 Rev. C3: Taking Power Down a Notch | PC Perspective
My System SpecsSystem Spec
11 Feb 2013   #46

Windows 7 64
RAM speed

Hi all.
Thanks for finaly shedding some light into this "somewhat" confusing subject.
I had the same doubt until reading this thread.

ASUS Sabertooth X79
i7 3970X
4x8 GB Kingston PC 12800

My System SpecsSystem Spec

 is my ram running at the right speed?

Thread Tools

Similar help and support threads
Thread Forum
How do I calculate the speed my ram is running at?
Alright, so I installed CPU-Z and I'm unsure to know what my ram is actually being clocked at. It shows that the DRAM Frequency is 933.4 MHz which should equal up to about 1866 MHz which is what the ram is defaulted to, but then when I go over to the SPD section it shows the max bandwidth is at...
Hardware & Devices
What speed is my Memory REALLY running at??
Friends this has nothing to do with which os, to my understanding, but I posted this on lesser forums and stumped everyone. I predict that will not happen on this forum! In theory my 'project' notebook, having i945GM chipset, is supposed to run the memory bus at either/or 266MHz or 333MHz. I...
Hardware & Devices
USB 2.0 running at (?)1.1 speed
Hi. When I connect my external hdd, it tells me that this device could work faster if I connect it to a Hi-Speed USB port. When I try to copy any files, transfer starts at about 70mb/s and stops after a few seconds, time left is «calculating» and when it starts again the speed is about 1.5mb/s....
Hardware & Devices
Desktop running on speed!
Don't know if this is the right place to post this, but please direct me to the right place if not. My desktop appears to be runing on speed! I switched it on, and that startup screen with the four coloured windows logo, is flashing like mad. The next screen I get is the password screen. ...
BSOD Help and Support
HIGH speed USB hub running at FULL speed.H
after dealing with PCI usb hub. i went and got external usb hubs and yes it worked on windows 7, but only FULL speed, my cam went from fast to laggie, iphone connect to usb hub had a message " it can perform faster if connect to a high speed port" , i check under device manager and it says " the...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:07.
Twitter Facebook Google+