New
#41
Hi Duzzy,
Tried changing the setting in the BIOS for the DRAM and chipset as mentioned above, but this had a negative affect.
CPU = 44 degrees celsius at the moment, its only been on about 4 minutes idling in BIOS screen.
I'm going to see if I can find that other download for the cpu monitor
Just defaulted the BIOS again, and booted with the good RAM and it states that the system has recovered from a serious error.
Got the Core Temp application running...
I was actually referring to setting Memory Clock Mode to 400Mhz if the RAM is DDR2 800Mhz (PC2-6400) the same as in the CPU-Z screenshots and leaving the voltages on auto.
EDIT:
I don't know why know one has suggested this but if the bad RAM is running at 430Mhz and it is DDR2 800Mhz (PC2-6400) then yes this could be the reason for the errors. Most decent branded RAM could handle a 30Mhz overclock but there's always the chance that this particular stick can not, either it's going bad or the RAM timings need adjusting to handle it and/or voltage (which has been tried).
EDIT: Apologies to Golden and Dave they both did state the underclock should not cause problems and Golden did mention about timings (Post #21 and #22)
But in saying this if your CPU-Z screenshot is the bad RAM then it's underclocked and less likely to have a problem although I have had a problem with underclocking mine any more than 10Mhz.
Last edited by Duzzy; 21 Mar 2012 at 11:13. Reason: Apologies
Well wait for the original helpers advice but I would say the RAM is a no go and needs to be replaced.
If others agree you could try the bad RAM in the PC that the good RAM came from but only boot Memtest don't let it boot Windows to avoid corruption. I say if others agree because there might be a minor risk involved and the likelyhood of a different outcome is minimal.
I was thinking the same thing that the RAM is caput. I can honestly say that this is the first time I have ever seen something like this happen to a 6 month old motherboard... It was 6 months old when it crashed and I put it in the cupboard and forgot about it for 2 years.
That sounds like a good idea to test the bad RAM in the other machine, I hadn't thought of doing that. But as you say, I'll wait and see what Dave says.
Yes, the CPU-Z screen shots were taken with the old RAM, this confused me as to how it managed to run long enough to do that, it wont even get to the desktop screen when I try to load it now. I knew what you meant though- overclocking meaning underclocking...
Tempermental machines...
Thanks for your help!
Dave has already given some DRAM settings to follow. Being on Auto is why the RAM is running at different speeds.