Is DDR3-1333 DDR3 4 GB will work on my G41 Combo?


  1. Posts : 33
    windows 7 x86 - windows xp sp2
       #1

    Is DDR3-1333 DDR3 4 GB will work on my G41 Combo?


    Will this ram : see the link
    Transcend DDR3-1333 DDR3 4 GB PC RAM (JM1333KLN-4G)

    will work on my mothrboard? Gigabyte G41-Combo Rev 1.3 with 2.80 Ghz Core2Duo Processor?
    Please help me.
      My Computer


  2. Posts : 12,012
    Windows 7 Home Premium SP1, 64-bit
       #2

    mastertushar said:
    Will this ram : see the link
    Transcend DDR3-1333 DDR3 4 GB PC RAM (JM1333KLN-4G)

    will work on my mothrboard? Gigabyte G41-Combo Rev 1.3 with 2.80 Ghz Core2Duo Processor?
    Please help me.
    Is that a G41M-Combo Rev 1.3?

    If so, it supports both DDR2 and DDR3.

    But you cannot mix DDR2 and DDR3. All RAM must be one or the other.

    The specific RAM you mentioned is not listed on the qualified RAM list, but that doesn't mean it won't work.

    From the Gigabyte web site for the G41M-Combo Rev 3:

    DDR3:

    2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory (Note 1)
    Dual channel memory architecture
    Support for DDR3 1333(O.C.)/1066/800 MHz memory modules

    DDR2:

    2 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory (Note 1)
    Dual channel memory architecture
    Support for DDR2 1066(O.C.)/800/667 MHz memory modules

    (Note: Mixed mode, populating DDR2 and DDR3 memory modules simulta- neously is not supported. Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
      My Computer


  3. Posts : 33
    windows 7 x86 - windows xp sp2
    Thread Starter
       #3

    @ignatzatsonic

    Than you for reply. Ya I can use the DDR 3 alone. But I am confusing about the frequency 1333 will support or not that's why asking here.
      My Computer


  4. Posts : 12,012
    Windows 7 Home Premium SP1, 64-bit
       #4

    mastertushar said:
    @ignatzatsonic

    Than you for reply. Ya I can use the DDR 3 alone. But I am confusing about the frequency 1333 will support or not that's why asking here.
    As stated in my post, that motherboard is supposed to support 1333 speed DDR3 RAM.

    Are you confused for some other reason?

    If you are mixing 1333 with some lower speed RAM, that may be pointless---the 1333 RAM would probably run only at the same speed as the slower RAM.
      My Computer


  5. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #5

    Yes it will support 1333MHz as in ignaztatsonic's post...
    DDR3:

    2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory (Note 1)
    Dual channel memory architecture
    Support for DDR3 1333(O.C.)/1066/800 MHz memory modules
    The (OC) means you will have to manually set your RAM specs that are printed on its label, for example only: 8-8-9-28 @1333MHZ, 1.65V or what ever your RAM says.
      My Computer


  6. Posts : 24
    Windows 7 Ultimate x86
       #6

    I also have a g41m-combo and use DDR3 1666 but as the mobo only supports upto 1333 (i think with OCing) then it only runs at that speed. So to your question yes you can use DDR3 1333 with the g41m-combo. I think it supports up to 8gb over the 2 slots so dont waste money on going over :)
      My Computer


  7. Posts : 33
    windows 7 x86 - windows xp sp2
    Thread Starter
       #7

    Than to all for reply. Now ordering the ram online.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:31.
Find Us