Intel DH67BL Motherboard Issue

Page 2 of 4 FirstFirst 1234 LastLast

  1. Posts : 4,161
    Windows 7 Pro-x64
       #11

    The card probably wasn't seated or dust got into the slot. Two weeks? That PC shop must be very busy.
      My Computer


  2. Posts : 41
    MS Windows 7 Ultimate 64-bit SP1
    Thread Starter
       #12

    hello again experts i want ur help again i got my new MB replaced from service center but after installing everything now new problem happening my computer is powering on automatically i checked everything from cabinet to ram graphics card and everything is good pls tell me wht is the problem there ??? did they sended the broken MB ??
      My Computer


  3. Posts : 12,012
    Windows 7 Home Premium SP1, 64-bit
       #13

    Edward Cullen said:
    my computer is powering on automatically
    What exactly do you mean?

    We need more details.
      My Computer


  4. Posts : 41
    MS Windows 7 Ultimate 64-bit SP1
    Thread Starter
       #14

    ignatzatsonic said:
    Edward Cullen said:
    my computer is powering on automatically
    What exactly do you mean?

    We need more details.
    ok while turning on my ups computer starts without pressing power button of cabinet
      My Computer


  5. Posts : 4,161
    Windows 7 Pro-x64
       #15

    Check to see if you have the power button leads attached to the correct pins on the motherboard. I think the alternate power pins are for normally closed (NC) switches.

    As a side bar; Why are you turning off the UPS?
      My Computer


  6. Posts : 41
    MS Windows 7 Ultimate 64-bit SP1
    Thread Starter
       #16

    carwiz said:
    Check to see if you have the power button leads attached to the correct pins on the motherboard. I think the alternate power pins are for normally closed (NC) switches.

    As a side bar; Why are you turning off the UPS?
    as i said i checked everything frm hardisk to cabinet pin graphics card rams on my nephews pc which is same as mine pc.

    wht do u mean by turning off ups ??
      My Computer


  7. Posts : 6,292
    Windows 7 64 Bit Home Premium SP1
       #17

    He means that you said that the problem occurs when you turn on the UPS. That would mean that the UPS was off. Curious as to why the UPS was off in the first place.

    Most people who use UPS leave them on constantly.
      My Computer


  8. Posts : 41
    MS Windows 7 Ultimate 64-bit SP1
    Thread Starter
       #18

    TVeblen said:
    He means that you said that the problem occurs when you turn on the UPS. That would mean that the UPS was off. Curious as to why the UPS was off in the first place.

    Most people who use UPS leave them on constantly.
    my ups is always on wht kind of ups u use ?? my ups has a power button which i press first then have to press the power button of cpu
      My Computer


  9. Posts : 4,161
    Windows 7 Pro-x64
       #19

    I guess I'm dumber than I sound but just so we're on the same page, a UPS is an Uninterpretable Power Supply and has a battery (or batteries) that will automatically transfer the load to an internal inverter should the line supply voltage go below a predetermined voltage. I am NOT talking about a PC power supply. You said you're having the problem when you are turning on the UPS. If you turned it on, it must have been off at some point.

    If you are referring to the PC power supply then please so state but that is not called a UPS.

    In any case, it sounds like the PC power button is faulty, if you've checked everything else. Does the PC startup on it's own with the power button leads disconnected?
      My Computer


  10. Posts : 6,292
    Windows 7 64 Bit Home Premium SP1
       #20

    And it (UPS) does not mean a surge protection power strip either!
      My Computer


 
Page 2 of 4 FirstFirst 1234 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:33.
Find Us