Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Restart issues with new motherboard Asrock N68C-S UCC

03 Jun 2012   #1
ginoatlive

Windows 7 Ultimate x64
 
 
Restart issues with new motherboard Asrock N68C-S UCC

Hey guys,

I am new to the forum, just signed up. To start things off I wanna ask if any of you have any experience with the Asrock N68C-S UCC motherboard or ever had to deal with a restart issue I'm facing with the Asrock N68C-S UCC. I just did a clean install after replacing my old ASUS motherboard with this new Asrock.

With default BIOS settings loaded, whenever I am in windows and need to do a restart, the system just shuts down and stays shut down, the monitor going into sleep mode. The rig is still on though, power circulating, fans spinning and all the lights connected still blinking. Yet I get no POST, no beeps to suggest the system is rebooting.

I checked the BIOS settings, enabled and disabled to see what might have cause this but nothing indicates that this restart issue can be helped. Its either that or I am extremely unfamiliar with the Asrock BIOS setting and terms/descriptions used. At the moment I'm not sure if this is a manufactured faulty motherboard or improper BIOS settings.

Any ideas? Please help!

At the moment I am running it with
phenom ii x2 550be
markvision ddr2-800 2x2gb
corsair nova 30gb ssd
xfx gtx 260 core 216
coolermaster extreme 600 watt


My System SpecsSystem Spec
.
04 Jun 2012   #2
pra40

windows 7
 
 

My System SpecsSystem Spec
04 Jun 2012   #3
ginoatlive

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by pra40 View Post
Update the BIOS...
I don't mean to sound ignorant, but flashing the BIOS with the latest version did not seem to resolve the problem. I did it over the weekend and still no change in restart failure.
My System SpecsSystem Spec
.

07 Jun 2012   #4
ginoatlive

Windows 7 Ultimate x64
 
 

After testing, nosing in the BIOS setting, installing and reinstalling I figured what the 'hey'. I'm just gonna ask for a replacement or have the local PC fix it. They did sell me the motherboard with a month's warranty. Not a typical whole year warranty as the manufacturer would offer, but still.
My System SpecsSystem Spec
Reply

 Restart issues with new motherboard Asrock N68C-S UCC




Thread Tools




Similar help and support threads
Thread Forum
ASROCK n68c-gsfx FX6300 overlock
HELLO to everyone! i tried to overclock FX6300 from 3.5Ghz to 4.0-4.4,but everytime i try to run Prime95 to stress,everything froze or WIn10 "BSOD" and restart,i only play around with multiplier,on this PC i have asrock n68c-gsfx(i know it's not very good for OC) i wrote everything i found on...
PC Custom Builds and Overclocking
Will an AMD FX-6300 work with an AsRock N68C-GS FX
Hi All, As the title says, will an AMD FX-6300 processor work with an ASRock > N68C-GS FX motherboard? I'm planning to upgrade my system due to FPS drops whilst playing DOTA 2. I've concluded that since the FPS drops happen after several minutes while playing and seem to have nothing to do...
Hardware & Devices
ASRock N68C-GS FX Network controller driver
Hi folks, I have fresh installatioin of Windows 7 Ultimate SP 1 x32 edition running on my PC. When I go to Device Manager I see that my Network Controller drivers are not properly installed. My network card is also listed as beeing Nvidia nForce Network Controller which is incorrect. After...
Drivers
[WTA] Installing RAM on N68C-GS FX motherboard
I have this motherboard, and I intend to add 2GB of RAM. My question is, is it possible if I install on both slot, which is DDR2 and DDR3 and utilize the RAM installed from both slot? My PC currently runs AM3 CPU, so I guess it supports the utilization from both slots. Just need a clarification on...
Hardware & Devices
BSOD & Restart with Asrock motherboard and Amd Cpu
Hello..I recently upgraded from a Biostar motherboard & Amd Phenom x4 cpu and 2Gb ram to Asrock 960GM-GS3 Fx motherboard & Amd Fx 4170 x4 cpu and 4Gb Corsair Vengeance 1600mhz Ram and at least twice a day (some times more) i get the BSOD and my pc restarts when windows is loaded up i get a message...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:11.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App