Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: MotherBoard Burned out

21 Jun 2012   #11
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

well i went straight to them as they are in the city of industry so hopefully soon i get this board im thinking it was just a weak board cause it burned so soon my dad has a friggin gravyard of MSI boards at his house

That is why i was like damn they might not be as good as i thought lol


My System SpecsSystem Spec
.
21 Jun 2012   #12
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Yeah S... happens and let's just hope it didn't take anything else with it !
My System SpecsSystem Spec
22 Jun 2012   #13
UnknownReverent

MS Windows 7 Professional 64-bit SP1
 
 

I haven't had any problems with MSI. I switched the them after I had an ASRock board fail on me. Happened right after the warranty went out as well. The first one was DOA too. So I stopped going for ASRock and then tried MSI. I gave the board to a friend, but he doesn't need it. So I'll probably end up rebuilding my old computer and selling it. I ended up getting an Asus for my new build though. Haven't had any problems with them as well.
My System SpecsSystem Spec
.

22 Jun 2012   #14
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

I have gotten in touch with RMA department

I will be able to pick up the replacement board on monday what worries me is it could happen again

I have some worries that maybe my PSU toasted my board but then again none of the molex connectors are burned or even touched

I wonder did it burn up due to overclocking cause I didn't overvolt anything really hence my CPU still looks unscaved

I know there is a check list of things to check off before moving forward assuming im fine

think i should have my PSU tested ?

So far i know my video cards work also with the MSI board WD My book always had to be repowered on after reboot or after booting could that been a hint because right now same WDmybook stays connected no issues with this board but not with the MSI

Maybe someone can explain this ?
My System SpecsSystem Spec
02 Jul 2012   #15
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Well guys my new MB is ready Same make model
Now ,I know i should do a clean install but figuring i could get away with just putting the same MB and just attaching the same hardware any thoughts?

Also I was told my Bord has been faulty for a while maybe that is why i never got voltages passed a certain point and others withthe same board wre hitting Astronomical numbers

Anyhow I am on my way to go pick it up and re install so anyone with any suggestions please let me know

I am ok with doing a clean install if there is no way around it thank you
My System SpecsSystem Spec
02 Jul 2012   #16
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

A reinstall is always best, but if it is the same make and model board, you should have no problems using your previous OS drive as long as it wasn't damaged.
My System SpecsSystem Spec
02 Jul 2012   #17
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Ok will do the guy at the RMA center said it was a bad part on the MB and OC didn't help it and made it burn out this board was built for OC in mind so i chalk it up to being faulty

Im about to give it a go and let you know what happens
My System SpecsSystem Spec
02 Jul 2012   #18
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Well I am in Mass Agrivation mode

It seems that my FX chip has a sh**load of bent pins and im trying to put them back looks like i might have to get another chip I can't belive this crap uhhgggg so pissed

well officially garbage chip now and i didn't even put the damn thing in
My System SpecsSystem Spec
02 Jul 2012   #19
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

How on earth did all those pins get bent? Did you have the CPU in it's plastic box or just laying around?
My System SpecsSystem Spec
02 Jul 2012   #20
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

i put it back in the Tin but obviously something happened between here and there im not even going to point fingers im just going to get a new one

It is more of frustration because one thing after another which is odd that my chip was bent just makes me wonder where all this downfall is comming from
My System SpecsSystem Spec
Reply

 MotherBoard Burned out




Thread Tools




Similar help and support threads
Thread Forum
Graphics card burned out?
My Sapphire Hd7750, which I had for i think 5 months, just stopped working. When I started up the computer this morning it went into the bootup screen saying Starting Operating System, then it just does nothing, so i restarted the computer. It booted up fine but it was very slow, after a while I...
Graphic Cards
PC Does Not 'See' Burned DVD
After burning a movie my pc will not play it. Whatever player I try and use (vlc, wmp, mpclassic, etc) it pops up a window with the 'please insert a disk' message. These discs play fine on all the stand-alone players in our house, including our blu-ray player. However, the pc will play all my...
Music, Pictures & Video
Need help with file arrangement on burned MP3 CD's
At first I burned an audio CD by dragging mp3 files into the writer. Then discovered that the order was not what I wanted, by track number, but was alphabetical by title. Looking at the File arrangement setting I discovered it was indeed set to -. So I changed it to and then burned another...
Music, Pictures & Video
my computer burned 2 hdd
hello Mr in the beginning my desktop computer specification is mother board H55 CPU core i3 RAM 4 GB DDR3 internal dvd\rw external dvd\rw monitor LED LG 19" ordinary power supply 400 watt HDD 1 Terabyte western digital
Hardware & Devices
burned CD bugs Vista vs 7
when i wanted to install windows 7 to replace my windows vista i made a couple of back up CDs for the image files i have. the funny thing is, i used these image files regularly with my vista and there was no problem. after the installation the OS recognizes the disk and knows that the disk is...
Software
DVD-r burned in Vista - can't see in win7?
OK, so I burned a DVD data disk in Vista before I upgraded my laptop. Dropped said disk into the drive to restore files, and huh? Shows as empty! I drop said DVD into an XP machine, all is there. OK, I am confused. The media is TDK DVD-R. I have never had trouble with this media on...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:02.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App