Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: SSD Question: TRIM and AHCI for this Gigabyte motherboard

04 Jul 2012   #1
Synaptic Sam

Windows 7 64 bit Professional Edition
SSD Question: TRIM and AHCI for this Gigabyte motherboard

I'm using a GA-M750SLI-DS4 with a NVIDIA nForce 750a SLI Chipset along with Crucial M4 128 GB SSD.

When I check if TRIM is enabled I get a 0 (which means yes). But I've read that nForce chipsets don't have TRIM support?!? is this true?

from (bare foot kid):
AHCI : Enable in Windows 7 / Vista

"Just to put in here for nForce users, nForce boards do not support AHCI (with the exception of nForce boards that include onboard graphic cards), and also don't send the TRIM command for SSDs.

Also, they don't hav AHCI support, right? Is there a way around this?


My System SpecsSystem Spec
04 Jul 2012   #2

Windows 10 Pro/ Windows 10 Pro Insider

As far as I am aware, the nForce controllers don't send the trim command, but if you use the Microsoft controllers, they will send the trim command.
My System SpecsSystem Spec

 SSD Question: TRIM and AHCI for this Gigabyte motherboard

Thread Tools

Similar help and support threads
Thread Forum
Gigabyte Motherboard Update Help
So I have a gigabyte GA-78LMT-USB3 (rev. 5.0) and basically in the bios utility I click update bios from Gigabyte Server and there comes up my model name and then an option of "AMD 760G, award bios, VER.FA" and really i just wanted to know if this is an update for my bios because naturally I do not...
Trim question
I noticed a post here that showed how to check trim status so I tried it but the results are not clear to me. I run an 80Gb Intel X25M SSD along with multiple other conventional sata HDs. Can someone interpret my results?
Hardware & Devices
Driver for AHCI Gigabyte EP45-UD3P
I have been reading for days and don't understand this. When I get a system built using all SATA the best setting in the bios AHCI? I know the RAID setting requires drivers and IDE does not but how about AHCI? Should I even use this setting? Does it require drivers or does W7 have...
Question about SSD drives without TRIM
I had bought an Intel SSD drive to put in my laptop (which I did) when I upgraded to W7. However, it's an "S1" model, so it will not do TRIM (only the S2 Intel models do or will) I keep reading about how this drive will eventually strangle itself when it gets to a certain use level of...
Hardware & Devices
Best AMD CPU & GigaByte Motherboard
I am thinking about getting this AMD CPU & GigaByte MB from NewEgg: - Computer Parts, PC Components, Laptop Computers, Digital Cameras and more! ModelBrandAMDSeriesPhenom II X4ModelHDZ940XCGIBOXCPU Socket TypeCPU Socket TypeSocket AM2+Tech...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:51.
Twitter Facebook