Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: win 7 rc my mouse won"t work after restart

07 Sep 2009   #1

Windows 7 Ultimate
win 7 rc my mouse won"t work after restart

i have an usb mouse ( a no name one) and after reboot won"t work . if i reconnnect the mouse he work fine . i deactivate from power management the "allow the computer to turn off this decvice to save power " option but the problemis the same. any ideas?

My System SpecsSystem Spec
07 Sep 2009   #2

64-bit Windows 8.1 Pro

Navigate to the Device Driver page and be sure that the appropriate USB drivers are installed.... Make sure that there are no yellow triangles ...
My System SpecsSystem Spec
07 Sep 2009   #3

Windows 7 Ultimate

my mouse is a pnp one and he dosen""t have any drivers . in the device manager everything is ok
My System SpecsSystem Spec

07 Sep 2009   #4

Windows 7 x86/x64, Server 2008r2, Web Server 2008

Correction even though the mouse is plug and play it still uses drivers.
It may take advantage of the Win7 driver set, or install drivers upon install.
If you connected it to a new pc that its never been plugged into before It would pop up installing new device.
My System SpecsSystem Spec
08 Sep 2009   #5

Windows 7 Ultimate

i use the same mouse to another pc with win xp sp2 and the mouse work fine without a driver , i guess it use a generic usb mouse driver
My System SpecsSystem Spec

 win 7 rc my mouse won"t work after restart

Thread Tools

Similar help and support threads
Thread Forum
PS/2 Mouse won't work after plugging in USB Mouse
So i bought a new USB Mouse because my PS/2 one is kinda broken with the left click, though i've searched for the problem and found out that it was the switch in the mouse, but i didn't feel like opening my PS/2 mouse and trying to fix it. So i bought a cheap USB Mouse. Now i've plugged it in, and...
Hardware & Devices
"Restart computer now?" - fails to restart
Hi. Whenever I'm asked if I wish to shut down and reboot now (after, say, uninstalling a program), I say 'yes'. More often than not, however, my restart only gets as far as the 'enter BIOS' screen (is that the POST screen?). To proceed, I have to press the reset button next to my main 'On'...
General Discussion
Restart doesn't actually restart nor does "Save and Exit" when in BIOS
Hey, I have a computer in the lounge which doesn't have an internet connection so the specs on my profile do NOT match the computer in question. Basically, the computer has an AMD 6 Core processor, 8GB of DDR3 memory a single harddrive and a dvd drive, if I go into the bios and then choose...
General Discussion
Keyborad and Mouse did fuction after restart BSOD during next Restart
While I was away I let vidoe play on my monitors and when I came back My PC restarted and my usb key board and mouse did not work. Luckly I have a PS/2 key board connected to my PC for such an emergency. Then from their I shut down the PC but I did a restart and during the shut down phase It gave...
BSOD Help and Support
"restart" wont work? Yet shutdown will?
This is quite possible a hardware thing with my machine but i am not sure so hope someone can help. I took the plunge yesterday and got Windows 7, and without botherign to dual-boot i formatted my HG and installed Win7. No problems there, all running here now fine. However i do have an odd...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:26.
Twitter Facebook Google+