Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: How to put Externals HHD into Internals with RAID!

11 Aug 2012   #11

Windows 7, 64Bit

i think that all the data is there, i just can't reach it!

My System SpecsSystem Spec

 How to put Externals HHD into Internals with RAID!

Thread Tools

Similar help and support threads
Thread Forum
How to make Windows assign the same drive letter to all externals
Some people come up with a special and specific requirement. And so it is with pkerr. He wants Windows to assign the same letter for all his external drives which he is using for backups. He will...
Hardware & Devices
What PSU is needed to run my internals
CPU: Intel Core i5 4460 (Base:3.20GHz, Turbo:3.4GHz / 6MB / LGA1150 / Quad Core), Haswell Refresh Mobo: ASRock Fatal1ty H87-PERFORMANCE MB, H87, 4x DDR3, 1x PCI-E 3.0 x16, 6x SATA III, 6x USB 3.0, HDMI, DVI, ATX GFX Card: GIGABYTE Radeon R7 250 (1100MHz), 1GB GDDR5 (4600MHz), PCI-E 3.0, DVI,...
Hardware & Devices
RAID 5 switched from single storage to raid 5, lost drive letter
I am running 7 pro 64bit on a ASUS p8p67 deluxe mobo and I copied all data from my 1tb storage D: drive to a backup external and proceded to install raid 5 with 3 single 1tb drives and the raid is up an running. However using Intel Rapid Storage Technology to setup the raid inside windows I had to...
General Discussion
Usb not recognized (flash drives and externals only)
I have done a few days worth of research and have tried multiple fixes and still cannot connect any flash drive or external drive to any usb port on my computer without the dreaded "Usb not recognized" error. My mouse and keyboard are both usb and have worked fine though. I have unplugged the...
Hardware & Devices
Windows 7 System Image - Restore Non-RAID to RAID 0+1
I created a windows system image with the backup and restore utility built into win7. This windows install is on a single hard drive. I built and onboard RAID 0+1 array and used the windows 7 install disk to restore the image on to the new RAID volume. Windows starts to boot up but the screen goes...
Backup and Restore
"Processes, Threads, and Jobs" - Windows Internals 5
Source : Microsoft Press : Sample chapter from Windows Internals, Fifth Edition

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:25.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App