Ssd boot?

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 2,973
    Windows 7 Professional 64bit SP1
       #11

    Did the BIOS ever recognize the SSD?
      My Computer


  2. Posts : 1,261
    Windows 7 Professional X64
    Thread Starter
       #12

    kbrady1979 said:
    Did the BIOS ever recognize the SSD?
    No, unfortunately.
      My Computer


  3. Posts : 2,973
    Windows 7 Professional 64bit SP1
       #13

    I am quickly running out of ideas...
      My Computer


  4. Posts : 1,261
    Windows 7 Professional X64
    Thread Starter
       #14

    kbrady1979 said:
    I am quickly running out of ideas...
    Me too!

    Sorry to have taken all your time- though it is greatly appreciated.

    I'll call Acronis tomorrow - I'm sure they can tell me what I did wrong or how to correct it.

    If not, I'll buy that program that was suggested in a previous post.
    It's worth it to me to not have to reinstall everything.
      My Computer


  5. Posts : 2,973
    Windows 7 Professional 64bit SP1
       #15

    PSCO2007 said:
    kbrady1979 said:
    I am quickly running out of ideas...
    Me too!

    Sorry to have taken all your time- though it is greatly appreciated.

    I'll call Acronis tomorrow - I'm sure they can tell me what I did wrong or how to correct it.

    If not, I'll buy that program that was suggested in a previous post.
    It's worth it to me to not have to reinstall everything.
    It's no problem at all man, I'm just sorry I couldn't fix your problem. I promise when you are up and running you will love that SSD! The problems you are having will pay off in the end. If I knew more about that software, maybe I could help you figure it out.........every time I have installed an SSD it has been a fresh install.

    If you need any other help, just PM me, we'll work through it.
      My Computer


  6. Posts : 1,261
    Windows 7 Professional X64
    Thread Starter
       #16

    kbrady1979 said:
    PSCO2007 said:
    kbrady1979 said:
    I am quickly running out of ideas...
    Me too!

    Sorry to have taken all your time- though it is greatly appreciated.

    I'll call Acronis tomorrow - I'm sure they can tell me what I did wrong or how to correct it.

    If not, I'll buy that program that was suggested in a previous post.
    It's worth it to me to not have to reinstall everything.
    It's no problem at all man, I'm just sorry I couldn't fix your problem. I promise when you are up and running you will love that SSD! The problems you are having will pay off in the end. If I knew more about that software, maybe I could help you figure it out.........every time I have installed an SSD it has been a fresh install.

    If you need any other help, just PM me, we'll work through it.
    I'll let you know what Acronis did to help - or not!!
      My Computer


  7. Posts : 1,261
    Windows 7 Professional X64
    Thread Starter
       #17

    ignatzatsonic said:
    PSCO2007 said:
    Thanks for the info.
    I'm still confused as to why the recovery of OS from the Acronis backup did not make the drive bootable
    I assume your original hard drive had at least 2 partitions: C and System Reserved.

    When you used Acronis to "copy" the original installation, do you know for a fact that you made an image of BOTH of those partitions?

    Or did you image C only?
    Your message from email does not appear in this forum (Have you tried various ports for the SSD? And a different set of cables?)

    Don't know why - anyway, I tried different ports , but I don't have any other cables - don't think it matters anyway, since they are perfectly fine on the other HDDs
      My Computer


  8. Posts : 540
    Windows 7 Ultimate 64bit
       #18

    You need to "clone" your HDD to ssd. Not "recovery ". That is why you do not see the system reserved and why it did not "copy" it and also why it will not boot from ssd.

    The $20 program talked about above does a great job. It was made just for that. Its a one trick pony.

    Arconis will do the samething though... I never used Arconis to do it, so can't say how well it does at it.

    If you want to try it ....wipe the ssd and "clone" the HDD over to the SSD.
      My Computer


  9. Posts : 1,261
    Windows 7 Professional X64
    Thread Starter
       #19

    jeepmann4x4 said:
    You need to "clone" your HDD to ssd. Not "recovery ". That is why you do not see the system reserved and why it did not "copy" it and also why it will not boot from ssd.

    The $20 program talked about above does a great job. It was made just for that. Its a one trick pony.

    Arconis will do the samething though... I never used Arconis to do it, so can't say how well it does at it.

    If you want to try it ....wipe the ssd and "clone" the HDD over to the SSD.
    I'll give that a shot, but in the past when I used that option (Clone) from a clean backup, it would not boot.

    I did have success with the recovery option, though.
      My Computer


  10. Posts : 26,869
    Windows 11 Pro
       #20

    The only issue with cloning is alignment on the SSD. Sometimes it works, other times not. Paragon does that for you.
      My Computer


 
Page 2 of 3 FirstFirst 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:42.
Find Us