New
#11
Ok, i found some screw drivers, and i have opened up the back part ( Where i did last time to replace the HDD ) and i can see the 2 Ram sticks. How exactly do i check to see if they are in right?
Laptop was working ok, few days later it started beeping on start up
-
-
New #12
Try to push them in on the edge, don't force them, also while your there check the hard drive is in correctly, Since you replaced it!!
-
-
New #14
Ok yes, they are all in properly. ( Again, my Laptop does start up to desktop while the CD is in the laptop )
What is next? ( Thank you again for your help so far )
-
New #15
Right!! What do you want to do? Clean install Windows 7? If so, anything that is on your laptop is going to get deleted forever, so if there is anything on there you need, back it up!! If not we can continue.
-
New #16
if you think that will make the laptop start without the CD and without Beeping, i can do it ( I don't have anything important to lose ) - IF not, what else do we continue with that could be the problem?
-
New #17
Update : Just turned the laptop back on, and let it beep ( Continously again ). after about 1-2min it started windows its self. ( This thing is driving my crazy ) Maybe an actual CLEAN format will fix it?
Update 2 : Started it up a second time, didn't beep at first, went to the " Starting Windows " Screen, then started beeping, and is now stuck on that screen beeping.Last edited by Yasmin91; 12 Sep 2012 at 12:09. Reason: Changes
-
New #18
Restart the laptop while its starting up keep pressing F10 Until you get to the bios, once in there you need to find boot options, change the boot order to HDD. Once you have done this find the save and reboot option, it should boot into Windows.
At the moment I'm guessing its set to boot from DVD, We want the HDD.
-
New #19
-
New #20
I have the option of : Notebook Hard Drive / Internal CD/DVD Rom Drive / USB Diskette on Key\USB Hard Disk / USB CD\DVD Rom Drive / ! USB Floppy / ! Network Adapter
Quote
Related Discussions