Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Hibernate/volmgr/crashdump disk problem after migration to new system

18 Sep 2012   #1

Windows 7 Ultimate x64
Hibernate/volmgr/crashdump disk problem after migration to new system

I recently migrated from my aged old box to a shiny new system, but though most of the migration went flawlessly there's two glaring and possibly related problems: crash dumps appear to be broken and I cannot hibernate.

The computer is a little confused about its capabilities according to diskpart. The new drive is an SSD which reports the following:

SAMSUNG SSD 830 Series ATA Device
Disk ID: xxxxxxxx
Type : SATA
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(1F02)#ATA(C00T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
What catches my eye is that, despite it being the only disk in the computer (and having sufficient pagefile space available and managed) its not considered a "crashdump disk". In fact, if I edit the crash dump settings in the Startup and Recovery dialog, I get an error event in volmgr (45 - "The system could not sucessfully load the crash dump driver.") Every single time. I even tested a crash dump with the ctrl-scroll technique... no crash dump was saved to the disk despite the BSOD.

As for hibernation, it's simple: if I try to hibernate, the screen goes blank for a few seconds and then I'm at my password prompt - and volmgr throws another event 45 in the log. (Note that "Hibernation File Disk" was "no" on my old rig as well... and it hibernates just fine, whereas the "Crashdump Disk" setting used to be a firm "yes").

I've used system repair to carefully remove and re-create the BCD file... the system still boots fine though this problem was not resolved by that. I strolled through HKEY_LOCAL_MACHINE\BCD00000000 but didn't find any obvious smoking gun (it's not clear that I could edit settings there if I wanted to though, given how its permissions are structured). I even might re-migrate as an offline test on another drive, just to see if this changes... though that doesn't really solve the problem. I suspect it's something really, really simple... I just wish I could zero in on what it is.

So, I wonder, has anyone run into this sort of thing before? How might I get crash dumps working again, without resorting to an extremely tedious reinstall? And I suppose, how might I get hibernation working again? I feel that the two are interrelated but I have a feeling the crash dump thing is the main problem - and it certainly would be useful were a BSOD ever to occur!

My System SpecsSystem Spec
18 Sep 2012   #2

Windows 7 Ultimate x64

Nevermind - it boiled down to uninstalling some software that hooked into the crash dump handler. In short, should you encounter this same issue, check the registry at:


And start uninstalling the parent of things there one by one. Don't just edit the list in the Registry... that may not suffice (or could cause even more problems).

It's surprising how many things are affected by this (like hibernation) that you wouldn't expect to care about crash dump filters....
My System SpecsSystem Spec

 Hibernate/volmgr/crashdump disk problem after migration to new system

Thread Tools

Similar help and support threads
Thread Forum
Random BSODs after system migration to new case
Hello all, I just moved the components of my rig into a new case (Phanteks Enthoo Evolv ATX), and have now begun to experience BSODs randomly. BlueScreenView seems to suggest that hal.dll is somehow responsible, which I doubt. Anyway, the system worked well before the migration, so I thinking the...
BSOD Help and Support
Cloning System Reserved Partition to Samsung SSD - Migration Software
Greetings, Has anyone got a Samsung SSD contact email or help forum? I am about to clone my Windows 7 HDD to Samsung SDD EVO 850. I cannot find any info how to cope woth two Windows existing partitions - System Reserved and the main one - C:. Does Samsung Migration software clone...
Hardware & Devices
WLM 2012 Migration to new system from HD image
I am looking for the best route to do a Windows Live Mail 2012 from "windows essentials," migration of email, contacts and accounts. First, NO "live messenger" login is used, so all this stuff is resident on the old disk image. No part of the "live/online/cloud" portion of this is used. It...
Browsers & Mail
SSD migration strange problem
Hi everyone, Today I have tried to migrate my HDD install of OEM windows 7 that was shipped with my Asus laptop to a new bought SSD in the same laptop, with a very strange result: The computer boots and starts up windows 7 on solely the SSD-drive, lets me type in my passwords, but then turns...
Hardware & Devices
Crashdump help for my windows. (Crashdump uploaded)
Hi guys. I really hope you can help me, im using my computer to study and it keeps on crashing. My teacher showed med this website and told me someone in here might be able to help me. Hope you maby find the time to have a look at my crashdump files. Regards Jake from Australia

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:52.
Twitter Facebook