Big disappointment


  1. Posts : 21,004
    Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
       #1

    Big disappointment


    Have just tried a test power up on the new Asus P8Z77-V board and the error light adjacent the 24 pin stays on.

    Now thinking it was a RAM stick I changed out the stick for the other one - same result. Have now tried all combos with two / one stick/s and it seems the problem is in DIMM slot B2 (furthest away from the CPU) it will not let the board work if anything is plugged in.

    Otherwise sticks plugged in any other configuration and the board goes fine.

    Anyone got any experience with Asus boards please that can throw some light on this? or am I looking at RTM?
      My Computer


  2. Posts : 6,292
    Windows 7 64 Bit Home Premium SP1
       #2

    You are most likely looking at an RMA. Sounds like a defective MB.
    You can play with the voltage to the RAM to see if it will light up that slot, but in my opinion it should work correctly out of the box.

    I've used a lot of Asus boards and I've been happy with them. I've been lucky.

    You are up against two realities:

    • Motherboards can be overly complex. Intel has a specification for MBs that run Intel processors. The manufacturer must meet those specifications, but there is nothing against adding more features and functionality. So big manufacturers like to add lots of STUFF to differentiate their product. And this stuff makes the board much more complex than it needs to be. More complexity equals more chance of failure.
    • Manufacturing standards. Companies determined long before PCs that due to "the law of diminishing returns" it is more cost effective to manufacture parts with a known small percentage of defects than it is to develop and implement processes that would reduce that rate to zero. Simply put, it is less costly to replace defective parts than to make parts with no defects. Most companies consider a 2 to 5% defect rate "acceptable".

    It doesn't help with the frustration, but that's life in the fast lane.
      My Computer


  3. Posts : 21,004
    Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
    Thread Starter
       #3

    Agreed TV it was very frustrating but essenbe put me onto that memory button - I haven't been able to find anything about it in the text -it just mentions find the error and resolve it. Now for that sort of money I expect a bit more in depth stuff than that to be honest.

    As you say it is getting fairly complex and with the new BIOS on top it is all a bit bewildering at the moment.

    Me if it were not for essenbe would have packed this board up ready to return it under warranty and probably getting a blast for the dealer saying that is what I should have done - with that button.

    Now I am quarter savvy with a fair bit of stuff but rely on you fellow members for a lot of this marvelous advice if it were not for you all I be in the cacky no mistake.

    So thanks for the reply my friend:)

    John
      My Computer


  4. Posts : 1,326
    Windows 7 Ultimate x86
       #4

    if you can boot into POST then run memtest, if not then you may as well return the board tbh
      My Computer


  5. Posts : 21,004
    Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
    Thread Starter
       #5

    pedroc1999 said:
    if you can boot into POST then run memtest, if not then you may as well return the board tbh
    Yeah well almost got it built now the test run was just a hook up to some power and a monitor.

    Anyway essenbe put me onto the memory button which the manual is sadly lacking info on - in fact it is very basic for someone like me - it now starts up with 1333MHz so once I get the install done maybe I can tinker around in that UEFI.

    That I find is quite complicated opposed to the old type BIOS.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:51.
Find Us