Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: How do I remap the axes of a gamepad?

17 Nov 2012   #1

Windows 7
How do I remap the axes of a gamepad?

I have a racing wheel, and currently the only way to have pressure sensitive pedals is having them both on the same axis, the y axis. Unfortunately, this means pressing them both at the same time means they cancel eachother out, and doesn't do anything. How do I remap one of the pedals to the currently unused Z axis?

My System SpecsSystem Spec
17 Nov 2012   #2

7 x64

Post on the forum for that gamepad.
My System SpecsSystem Spec
17 Nov 2012   #3

Windows 7

Doesn't exist, and even if it did this is still a windows 7 problem, is it not?
My System SpecsSystem Spec

18 Nov 2012   #4

Win 7 Pro 64-bit 7601

Nope, you are having issues with a peripheral, making their products work with Win7 (and work at all) is each device manufacturer's job, not the other way around.

Still, since you say it doesn't have a forum (or you didn't find it), please post the name and model of the device ("racing wheel" is a bit too generic), and let's see what we can do. Not being a win7 issue, there is no guarantee that someone will help you fix the issue.
My System SpecsSystem Spec
18 Nov 2012   #5

Windows 7

the wheel is a Sector 7 Xtreme Gaming wheel. It has a USB connector and one for a PS2 console. I don't have the driver disk, and I couldn't find the official drivers, so I've been using the windows ones.
My System SpecsSystem Spec
20 Nov 2012   #6

Win 7 Pro 64-bit 7601

Found nothing, not even the manufacturer's site.
Passing words to others that may know more.

In case none can help, I suggest to look around the net for people with that same gaming wheel and ask them how they made it run, or if they can send you the drivers from their driver CD (if any).
Here is one

Here is another

And the last one I found
My System SpecsSystem Spec

 How do I remap the axes of a gamepad?

Thread Tools

Similar help and support threads
Thread Forum
My gamepad detected as Generic Usb Joystick, Not as USB Gamepad.
I bought Enter E-GPV10 Controller for PC. Usually gamepads connected to my laptop would be shown as USB Gamepad. But not this one. My games such as Ashes Cricket, Portal2, COD MW ignore this gamepad even when connected. Device Manager shows 'Human Interface devices' with two drivers 1. HID...
Hardware & Devices
How to create two adjacent Y-axes in Excel 2010
Hello, I am creating histogramm for statistics course. How can I please add two adjacent Y-axes to histogramm? Typical example image of histogram is attached. Thanks.
Microsoft Office
Remap key?
My up arrow key is broken, I didn't keep it. And placing a new one in it's place doesn't seem to work. How can I remap one of my useless keys to an up arrow key?
General Discussion
Remap Fn key
I have an MSI Wind 123 netbook and, for some odd reason, MSI put the Fn key to the left of the Ctrl key on the far left hand side of the bottom row. This is a real nuisance. Can anyone tell me how to swap functionality of the two keys, so it is consistent with my other keyboards? Thanks in...
Standard gamepad driver for Gravis Gamepad Pro USB?
Hi, I've got a Gravis Gamepad Pro USB and although a device is detected when I plug it in, it fails to install a driver. I can't find any Windows 7 x86 drivers on the net so I believe that I have to use some kind of standard HID driver to get it working, although I'm not sure which one. When...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:18.
Twitter Facebook Google+