Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: How do I calculate the speed my ram is running at?

01 Dec 2012   #1
Fuhaxian

Windows 7 Ultimate x64
 
 
How do I calculate the speed my ram is running at?

Alright, so I installed CPU-Z and I'm unsure to know what my ram is actually being clocked at. It shows that the DRAM Frequency is 933.4 MHz which should equal up to about 1866 MHz which is what the ram is defaulted to, but then when I go over to the SPD section it shows the max bandwidth is at 667 MHz.

So what does each one mean, what is my ram being ran at?

Fuhaxian




Attached Thumbnails
How do I calculate the speed my ram is running at?-untitled.png  
My System SpecsSystem Spec
.
01 Dec 2012   #2
Dwarf

Windows 8.1 Pro RTM x64
 
 

That is perfectly normal. Mine is reading the same. I think that it could be a bug in CPU-Z or, more likely, that it only picks up the fastest JEDEC timings for the Max Bandwidth section. You are, however, running at the higher frequency which is the XMP profile settings.
My System SpecsSystem Spec
Reply

 How do I calculate the speed my ram is running at?




Thread Tools




Similar help and support threads
Thread Forum
How to calculate total uptime in my PC?
Hi! Are there any software for calculate my PC total up-time. Windows task manager can only calculate 1st season up-time. But windows task manager can't calculate today, this week, this month total up-times. So how do i do it? Are there any special utility software for that?
General Discussion
How to calculate the used file space on C?
. I have Win 7 Home Premium, 500 GB disk. I'm getting a "low disk space" message for drive C. Using "Properties" for C, I can see that the used space on C is 307 GB, and free space is 6.5 GB. Note that when my laptop was new, I moved my entire "Documents" folder to the E: partition,...
General Discussion
is my ram running at the right speed?
ok, the specs on my motherboard from MSI say this here: MSI Global ? Mainboard - 790FX-GD70 ill attach an image. the board says DDR3 800/1066/1333/1600*/1800*/2133* (OC) DRAM, 16GB Max. i'm using the program Speccy and it says my ram is PC3-12800j so it should be running at 1600mhz... but...
Hardware & Devices
SSD says only 21GB Free, I calculate that there should be 33GB-Help!
Hello all, So I just got done with a fresh install of Windows 7 Professional x64 onto a 64Gb SSD that has 56 free with nothing on it. I saw that my SSD had only 21 Gb free, so I looked to see what was taking up so much space. I right clicked on all of the folders and calculated myself how much...
Performance & Maintenance
HIGH speed USB hub running at FULL speed.H
after dealing with PCI usb hub. i went and got external usb hubs and yes it worked on windows 7, but only FULL speed, my cam went from fast to laggie, iphone connect to usb hub had a message " it can perform faster if connect to a high speed port" , i check under device manager and it says " the...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:47.
Twitter Facebook Google+