New
#61
The op is problably sleeping as he said. My zar is still running and im going to go sleep. Il speak to you tomorow
The op is problably sleeping as he said. My zar is still running and im going to go sleep. Il speak to you tomorow
after installing the cable go to the disk manager and update the list. the new HDD would be appear, then go to the disk management and label the new hdd that has found... it may takes time to find the HDD because of the bad sector, let it do it.
But be carefull. I think i read in another thread that this can damage the mobo if not done correctly
Yes, Could you check back on my thread please
It's not a NFTS type, it says that it's a logical drive type; file system is BAD DISK; capacity is 149 gb; unused 0b; status : None
after 3 hours of testing (I had to repeat the test this morning, because the power went out over the night) it has done 12% and none partitions appeared... so i closed the setup and came back here.
Keep it running... It will go on for as much as 5hrs, if it does find a partition it will tell you i think... report back if it does
Whole disk was 1 partition? No unallocated space at beginning?
Try this Video heop on how to perform disk surface test with Partition Wizard partition manager?
Let it run for 15 minutes. No bad sectors?