Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: replacing a hard drive

26 Dec 2012   #1
leonard jones

Windows 7 Ultimate x64
replacing a hard drive

I am looking to replace my hard drive with a ssd.I have a acer aspire all-in one z5610
I am doing research on what/which ssd is best ?
which will fit my system?
what size is best 256?
I have looked at crucial and kingston

the all-in-one is very similar to a laptop(no spare bays)
I would like to use the existing sata drive but it will almost certainly have to be external.
would the old drive as an external require power?
I have an esata option on my pc could I use this for the old drive?

are the connectors on a ssd the same as a sata drive?
will my system support sata3 6gb?
I think the existing drive is a 2.5" probably in a tray
will the new ssd fit straight in its place?
is it worth it?

My System SpecsSystem Spec
26 Dec 2012   #2

Windows 7 Ultimate x86

I cant recommend any but i would say corsair or seagate drives. You would have to buy an enclosure and yes it will need power. The ssd should fit right in because the connectors are the same. I will answer the rest when i go on my computer
My System SpecsSystem Spec
26 Dec 2012   #3

Windows 7 Ultimate 64 bit

If you want to replace it, like you stated, all you have to do is remove the mechanical drive and replace it with SSD, then install your OS. Fairly straight forward process.
My System SpecsSystem Spec

26 Dec 2012   #4

Windows 7 Pro X64 SP1

There's a service manual out there:,d.dmQ

(Seems legit, even though the site is in Russia. The .pdf is in English.)

It appears that some models of machine have provision for both an HD and an SSD. As sold by Acer, the SSD is intended as cache for the HD. I can't answer whether your PC would include the connector and bracketry for the absent SSD, or whether the SSD Acer uses is a standard 2.5" type. It's possible that you can use both an SSD plus your hard disk internally, but you may have to disassemble the machine to be sure.

Your all-in-one seems to be limited to 3Gb SATA (sometimes called SATA 2), but that's not a severe limitation.

If your main criterion is reliability, people seem to prefer the Intel drives for that. (I don't own one.) I''ve been happy with my Corsair Force GT 120GB, even though it uses one of the infamous Sandforce 2200 series controllers.
My System SpecsSystem Spec
26 Dec 2012   #5

Windows 7 Home Premium 32-Bit - Build 7600 SP1

Quote   Quote: Originally Posted by leonard jones View Post
I am looking to replace my hard drive with a ssd.I have a acer aspire all-in one z5610

are the connectors on a ssd the same as a sata drive?
will my system support sata3 6gb?
I think the existing drive is a 2.5" probably in a tray
will the new ssd fit straight in its place?
is it worth it?
Even if it only runs at Sata 2, you will notice a vast difference in the performance. It will boot in about 25 seconds and the programs open in about one second. They are just lightning quick. There is no way that you will ever regret the switch. I don't know if delivers to England, but they have had some great sales over the last week or so. Check them out.
My System SpecsSystem Spec

 replacing a hard drive

Thread Tools

Similar help and support threads
Thread Forum
Hard drive cable not sure if it needs replacing
I have an HP windows 7 64bit Fully updated via windows update. Over the years I have slowly upgraded parts inside here and there. One of the things I upgraded was the harddrive from 750gb to 1TB...The old one went out had bad sectors. Everything has been working fine for years and...
Hardware & Devices
Replacing Hard Drive - What do I need to do prior?
Hello, I am going to replace my hard drive and want to install an OEM Windows 7 O.S. The current hard drive is about 250 GB. I would like to install a 1TB hard drive as the primary drive, then use the other drive as a second hard drive. Can I do that? Where do I go to set this up? When...
Hardware & Devices
Replacing the hard drive with an SSD - easy?
Got an 128 GB SSD last night. Did a backup on the hard drive. Need to revisit the instructions, but it's install the SSD, put the boot CD in, plug the old hard drive in an USB port and let the process go. That easy? Will Microsoft be asking for activation on Win 7 and/or Office?
General Discussion
I get a BSOD, despite replacing the hard drive
I'm at my wit's end here. So I've had a computer now, for about two years. I use it to do schoolwork, play tf2, post on a forum, nothing major. But I swear, it's like whatever I use with the computer only has a short amount of life before failing. I got the computer from a more savvy friend....
BSOD Help and Support
Replacing hard drive and restoring everything
I have a 4 month old HP laptop whose hd is failing. The good news: they are sending me a new hd. The bad news, it is a blank hard drive. So I need to restore everything on it, including the system. Time is of the essence because I have 3 days after it arrives to return the defective drive to HP...
Installation & Setup
Help. Replacing Laptop Hard Drive
I'm getting a bigger hard drive for christmas and i'm unsure how I'm going to go about cloning my current hard drive and putting it onto the new one. First question; what program do I use to clone my Win 7 OS to the new Bigger hard drive? Second question; when cloning the hardrive do I copy...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:04.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App