I just facing a problem after format my hard drive. after formatting hard drive my computer does not start while RAM and computer's M/B working properly. i have some doubt about on my hard drive. my hard drive working properly when again format the disk. during installation its shows all partition and installed windows 7 component.but don't ahead after M/B Sign. and tell me about "Hard drive pre-delay" BIOS setting.
Hello avina mate I am sorry but I am having a little difficulty in understanding what your problem actually is.
You say you re installed the 7 OS well that would have gone over whatever you had on the hard drive. Now I am thinking perhaps maybe you are thinking how to set the BIOS to boot from the hard drive first? If so on power up go into the BIOS an set it (the hard drive) as the first device for booting from.
If you have suspicions about your HDD try running a hardware test on it
Hard Drive Diagnostic Procedure
If you have issues with bios settings post back with specific entries its kinda hard to make out your problem
@Pauly
Hard Drive Diagnostic Procedure available for boot time scan. if available please tell me diagnostic tool for "Samsung HD503HI" .
Samsung use seagates seatools program for there drives heres the link
SeaTools for DOS tutorial
@ICit2lol and Pauly
a big thanks for your support .
other guys which face this kind of problem follow the instruction which guided by the ICit2lol and Pauly.
for make a boot scan you can also use your USB, for this you can use "YUMI" S/W download from the following link
YUMI - Multiboot USB Creator (Windows) | USB Pen Drive Linux and choose option (Run from Ram)
sorry ICit2lol and Pauly for late thanks
Quote