Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: RAM displaying different CAS in each slot?

25 Jan 2013   #11
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64
 
 

Very interesting. I like Dwarft's method. I have never had that happened with matched ram.


My System SpecsSystem Spec
.
25 Jan 2013   #12
teapo

Windows 7 Home Premium SP1 64bit
 
 

Thanks for the feedback guys.

Dwarf, I reset the BIOS / CMOS via your steps so everything went back to default settings. I tried Memtest with the individual sticks and I get the same results as mentioned before. Then I tried ionbasa's suggestions with both XMP profile and manually changing the CAS latencies but they still appear as 6-6-6-20 on the test. Perhaps this is normal for those two slots to read my memory that way? When I Dual Channel, Memtest and the BIOS will read it as 9-9-9-24.

And yes, my BIOS firmware is up to date.
My System SpecsSystem Spec
25 Jan 2013   #13
Dwarf

Windows 8.1 Pro RTM x64
 
 

That is certainly not normal. What timings are displayed by the SPD tab of CPU-Z? Are the timings you are reporting mentioned on this tab?

RAM displaying different CAS in each slot?-capture.png


My System SpecsSystem Spec
.

25 Jan 2013   #14
teapo

Windows 7 Home Premium SP1 64bit
 
 

Dwarf, here is what CPU-Z is reporting for both slots (Dual Channelling right now).

Unless you wanted me to see what CPU-Z reports if I'm running with 1 module in Slot 1 or Slot 3?


Attached Images
RAM displaying different CAS in each slot?-slot1.jpg RAM displaying different CAS in each slot?-slot2.jpg 
My System SpecsSystem Spec
25 Jan 2013   #15
Dwarf

Windows 8.1 Pro RTM x64
 
 

Yes please, since those are the slots that are giving you those timing figures. I see no mention of those figures on your SPD snips though, which leads me to believe that your board could be faulty.
My System SpecsSystem Spec
25 Jan 2013   #16
teapo

Windows 7 Home Premium SP1 64bit
 
 

Alright here's the results and a pic I got from doing Memtest single channel earlier.

RAM displaying different CAS in each slot?-slot1-single.jpgRAM displaying different CAS in each slot?-slot3-single.jpg

RAM displaying different CAS in each slot?-slot1-memtest-single.jpg


My System SpecsSystem Spec
25 Jan 2013   #17
Dwarf

Windows 8.1 Pro RTM x64
 
 

What timings are shown on the Memory tab of CPU-Z? It would be helpful to use just a single stick of RAM (the same one) and show what you get on this tab for each slot. The SPD tab shows you the available timings as stored in the module's SPD chip, whereas the Memory tab shows you the actual timings currently in use.
My System SpecsSystem Spec
25 Jan 2013   #18
teapo

Windows 7 Home Premium SP1 64bit
 
 

The CPU-Z reports in post #16 are from using single sticks. I used the same stick in Slot 1, took the screenshot, and then turned off computer to insert it in Slot 3 and took that screenshot. Running on 4GB (1 stick) right now in Slot 3 as we speak.

EDIT: Sorry, just re-read your post... let me grab the Memory tab.
My System SpecsSystem Spec
25 Jan 2013   #19
Dwarf

Windows 8.1 Pro RTM x64
 
 

I'm just about to hit the sack as I'm at work early in the morning. I'll be back later. :)
My System SpecsSystem Spec
25 Jan 2013   #20
teapo

Windows 7 Home Premium SP1 64bit
 
 

Okay, here is the Memory tabs for the same stick in Slot 1 (top) and Slot 3 (bottom).

RAM displaying different CAS in each slot?-slot-1-single-memory.jpg

RAM displaying different CAS in each slot?-slot-3-single-memory.jpg

EDIT: alright mate, I appreciate your help. Will continue to do research on the BSOD thread XD.


My System SpecsSystem Spec
Reply

 RAM displaying different CAS in each slot?




Thread Tools




Similar help and support threads
Thread Forum
Does an x1 card in my x16(wired as x4) slot slow down my x16 slot?
(Dell Optiplex 7010 MiniTower) I have the following slot configuration: 1. PCIe x16 (with GTX750 in it) 2. PCIe x1 (Unusable: It's covered by the GTX750) 3. PCI (of no use) 4. PCIe x16, wired as x4 If I put a PCIe 1x USB3.0 card into slot #4 above, will it slow down the video card in slot...
Hardware & Devices
Can I put a 8GB ram in this slot(s)
Hi, I have this laptop/specs Review Samsung NP355V5C-S05DE Notebook - NotebookCheck.net Reviews So there's 2 DDR3 slots in the machine, both occupied by 2GB and 4GB I've seen on the internet you get 8GB ram pieces. The website says that I can switch the 2gb for a 4gb to have a maximum...
Hardware & Devices
New Ram, Which Slot?
Ok, I'm thinking about buying this (http://www.amazon.co.uk/Corsair-Vengeance-Performance-Memory-Module/dp/B008E3M4TU) for my PC, I have already got both the blue slots filled. So which one do I put my new slot in to? 1,2,3 or 4 (2 and 4 are available) My MotherBoard Gigabyte GA-Z77M-D3H-MVP...
Performance & Maintenance
RAM slot not seeing RAM
I bought 2x2gb RAM Kingston DDR2 6400 non ECC etc as I have upgraded to WIN7x64. Here is my Motherboard GIGABYTE - Motherboard - Socket 775 - GA-945GCM-S2L (rev. 1.0) I have 2 RAM slots. The first seems to be fine. The second slot doesn't seem to work. With both cards in only 1x2Gb...
Hardware & Devices
PCI slot x16
WOW, I guess I need to learn some more about Video Cards.. I'm in dispute, can an Nvidia board, accept ATI cards as long as its the same slot. Lets say I have GIGABYTE GA-M57SLI-S4 AM2 NVIDIA nForce 570 SLI can I add, this GPU VisionTek 900196 Radeon HD 2400PRO 256MB 64-bit GDDR2 PCI...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:16.
Twitter Facebook Google+