Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: My external hard drive suddenly became unllocated:

12 Apr 2013   #1

Windows Ultimate x86, SP1
My external hard drive suddenly became unllocated:

I have restored an image created by Macrium from my external hard disk which became now unllocated for reasone I didn't now. After the restoration successfuly completed, I closed the macrium environement. Then, after my computer restarted I found that there is a window telling me this:
Windows Manager Boot:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1- insert your windows installation dis and restart your computer.
2-choose your language settings and then click 'next'
3- click repair your computer.
if you don't have this disc, conatact your system adminstrator.

I booted from Macrium Secure CD version 4.0, which has an option to fix the boot error. Then, I choose fix boot error.
There were four optitions, Which I think were:
Master Boot Recored
Unique Hard Code
Boot Database configuration

NOTE: I have run boot fixing while my external hard drive is connecting to my computer, is this the reasone causing my external hard drive became unlocated.

After fixing Boot, my system booted correctely.
However, I was shocked that my external hard dirve which mostly has all my very important data has been unllocated. So my system didn't recognised my hard drive.
I am quite sure that I didn't do anything wrong because I am quite keen.
I didn't do anything so far(such as format or created), so could you please let me know if I could do anything to let my drive keep all the data stored on it.
Could you please help me becuase this hard Drive has everything(Images, programs, and data) I did two years ago? It is exactly my archeive.

Even when I resore my system from recovery disk, the same thing is

This is the hard disk management::

When I first connect my hard drive after a clean installation of windows from my recovery disks, I saw this window, although that the hard drive was one partition with NTFS.

This is the device manager::

Could you please at least give me any program to help me to recover all my data stored on my hard drive which became unllocated. I didn't proceed anything until now because I am afraid that if I had recreated it all the data inside it would be permentely deleted and would not be able to recovered.
It would be highly appreciated if you could help me.

My System SpecsSystem Spec
13 Apr 2013   #2

Windows 7 Home Premium 32 bit

Your 1TB external drive (Disk 1 in your screenshot) has turned unallocated and you want it to be fixed without losing any data on it. Right?

Then try the procedure given below. Do plug out all other external HDDs - your Passport for example - and any other pen drives/ storage devices..

Download and install the latest version of MiniTools Partition Wizard Home Edition (Free) from Free download Magic Partition Manager Software, partition magic alternative, free partition magic, partition magic Windows 7 and server partition software - Partition Wizard Online

Proceed to the topic in Recovery with Partition Wizard: SanDisk Cruzer Blade 16GB (In your case it will be the "unallocated" external drive.)
Recover a flash drive turned RAW Partition Wizard and TestDisk.

Run the partition Recovery Wizard and recover the partition.
My System SpecsSystem Spec
13 Apr 2013   #3

Windows Ultimate x86, SP1

Thank you so much indeed for your kind reply.

Yes, you are absolutely right. But could you please let me know what caused my drive which has one partition with NTFS to be suddenly unllocated. Did what I said about fixing boot error for windows restored from Macrium image cuased this. I don't think that. Or maybe I accidentely did something with Bootable Wizard partition CD anything. I didn't remember I did something wrong because I am quit keen to not do something wrong while trying fixing the problem with system image restored via Macrium secure cd.
I would like to say something I remembered now,
I resotred an system image of a different version of windows contaning two partitions (system and C(OS), on a diffrenent version of windows installed on a diffrent layout(two partitions) of hard drive.
In other words,
Images restored was two partition(system(active) and C(OS)] of Windows 64x home premium.
Windows installed was two partition(C(OS) active) and personal Data partition(E).
When I restored image via Macrium CD, I drugged the two partition(System and C) one after the the partition (C) on desitnation. So, the personal partition (E) on destination remained as it was.
Also, I moved all user accounts to another partition other than system partition(C) in the image restored.

So when I fixed the boot error with Macrium Secure CD 4.0, and I logged in windows while my external hard drive was connected, I faced that I was logged with a temporary porfile because the user account which are on the partition didn't restored were for other version of windows.

So I think this the Windows caused the problem while preparing desktop of my user account.

I should have restored all the layout of image(System:active partition, C: OS and personal data) as long as I moved all the user accounts to another partition other than system partition because logged with the user accounts moved to D, windows created a temparay profile because it thought that profile of user deleted.

By the way I was having both MiniTool Partition Wizard installation and Bootable CD; however, the data recovery and lost partition recovery are not activated in the free edition. Only the copy and spilte drive are avialable

I was using Mini data recovery Wizard before I faced this problem. There were about five options:

1- Recovery deleted item,
2- Recovery lost partition
3-'Data recovery'
4- Recovery media
5- Recovery optical drivers
However, when I tried running 'Recovery lost partition' and 'Data recovery'

I didn't see any benefit from those options at all.
All the datas recovered were corrupted, although the program took about 3 hours on the entire disk whose space is (700GB), and took about 2 hours on a partition whose space is 600 GB.

Also, I saw in the result of Mini Data Recovery Wizard for entire disk(lost partition optition) that there were some Partitions listed in the result, one of them with RAW and the others don't have 'RAW'. when I click show files, I saw that there are catogaries such as: Media player vedio, MP3 player. Quick player. Archieve such as winrar and winzip. However, I didn't see that there are Setup files of programs, My hard dirve has many setup of programs and many documents.
Besides, whenever I chose a catogary to be recovered, I saw that some files are corrupted when I run them. Also, I saw that the files which were recovered were insided folder which is called 'RAW'
Also, if I chose the catogary 'Media player vedio' I saw that files were recovered in this folder ''Media player vedio'

As a result, I would never get the same organisation of my folders, subfolders, files and Mcrium images inside my hard drive, even if I successed recovered it.

Note: I didn't proceed anything since my drive has been unllocated because I have been shacking from what heppened. I was quite sure that I didn't do anything made this happened.

I want my external hard drive to be fixed and returned as it was (all folders, and subfolders and files inside them with the same names and organization)

This is a very, very imporatant drive for me, so I don't want to do anything which can result in lost all the data stored on my hard dirve. So could you please help me with a remote help?

I am ready to do anything to let my drive return back as it was, could you possibly help me with this issue?
I nearly don't like to talk or see anybody since this problem happened for my hard drive. So if you helped me with issue and let my drive come back as it was, you would be as if you gave me a ten thousands dollars.

This is the picture of Mini partition wizard, after clicking on partition recovery wizard,
Then this wizard showed me

If I successed recovering my unllocated drive, where should I recover the result?

How much time do you think it will be taking to recover all the datas stored on the drive?
Do you think that my hard drive can be returned back as it was?

I would quite highly appreciate your help.
My System SpecsSystem Spec

13 Apr 2013   #4

Windows 7 Home Premium 32 bit

Your questions clearly show that you haven't read the topic I had referenced with due diligence. For your information I am reproducing it here with little modifications:

Click on Partition Recovery Wizard and Next.

In the Partition Recovery Wizard screen, select the external drive to be recovered and click on Next.

Select Full Disk, and then Next.

Select Quick Scan, Next

If the partition is found correctly showing full details instead of unallocated, select it and double click on it. Does the Partition Explorer show the files on it? (Unlike in TestDisk, one cannot copy the files at this stage. The partition has to be necessarily restored.)

Close the Partition Explorer and click on Finish.

The Main Screen will show the restored external drive but still without a drive letter.

Right click on the drive, click on Change letter and give a drive letter.

Click on Apply to execute the two pending operations.

The partition will be restored and your external drive will now be functional and you can access the files and folders.

( The Partition Recovery procedure merely rewrites the possibly corrupt partition table and does not touch any of your data. Your external hard drive is restored in-situ to its original condition with all data inside.)
My System SpecsSystem Spec
13 Apr 2013   #5

Windows Ultimate x86, SP1

Thank you so much for contuning

If I fell that I might do something wrong, could I undo the step without reulting any problem on my drive.
Should I proceed without afraid of anything can cuase me drive?
On other words, must I be very keen about something before proceeding. Or even I did something wrong, I can apply the step again until my drive be recovered as it was
If I have done step by wrong, could it cause permentely lose of my data stored on drive?
This is what I am afraid about.
I hope you understand me.

in you screenshot you have chosen fat 32. However, my drive was NTFS.

The partition explore comes after choosing searched partitions, does it? Because if so, I can see my fils and folders and will know all my datas will be recovered with same organisation as they were.
My System SpecsSystem Spec
13 Apr 2013   #6

Windows 7 Home Premium 32 bit

In the trial I did it was a FAT32 formatted pen drive and so it rightly showed FAT32. :)

In your case if the Partition Recovery Wizard is successful, it will indicate NTFS.

Absolutely nothing can go wrong. Just make sure that you select your unallocated drive.

In the worst case, if the Partition Recovery Wizard is unable to find the partition information after a quick scan ( first)/ Full/Deep scan (if Quick scan fails) , it will indicate that you have to resort to some other Data Recovery procedure.

And nothing happens till you click on Apply and you will be doing that only after confirming that your external drive is shown with correct details, and the Partition Explorer shows all your files.

The partition table is located in in the first sector of the drive called boot sector/MBR. Rewriting the first sector does not affect your data located in other sectors.

Note: I prefer not to say anything about the other aspects you had brought in post #3 coz........ I don't want to pull my hair on it - though I have a lot of it left.:)
My System SpecsSystem Spec
14 Apr 2013   #7

Vista Ultimate X64/ Windows 7 Dual-boot

The only reason this would have happened in restoring an image from the external HDD is either the restore process was interrupted or power was lost temporarily to the external for whatever reason.
My System SpecsSystem Spec
15 Apr 2013   #8

Windows Ultimate x86, SP1

I have done what you have said but I still have not applied the two operations.
I would like to ask you about these two inquires
First: All the folders named in Arabic are shown with a question mark as this screenshot shows. Will they be restored with a question mark or with its original name?

Second: Are these surrounded by the blue colour files or folders, if they were files, there should have been a size number under size catogary on fornt of them as the files under them.

But the most strange thing is that the hard drive is not shown under my computer while unllocated. However, I can click on drive to be removed safely in system tray.
My System SpecsSystem Spec
15 Apr 2013   #9

Windows 7 Home Premium 32 bit

I pass these questions to others who might have some knowledge about it.

But I shall repeat that restoring the partition does not write a single bit, byte, zero or one to your data sectors and it will be accessible "as was, where was, how was and what was". I don't know how was and what was.:)

And if you really want to, you can resort to the other method of data recovery using TestDisk. TestDisk - CGSecurity The advantage here is that you can copy all the files/folders or any of it to another drive. Note: If you want to copy to another external hdd or pen drive, you have to plug-in those before you run Test Disk. When you run Test Disk, those drives will also be seen in it. Once you have copied and seen the folders/files, you can raise any further queries on the recovered files ( the ones you have raised in the previous post )

Recovery with TestDisk:

Run TestDisk

1. At the first screen select “No Log” ENTER

2. Select the drive to analyse, choose “Proceed” ENTER

3. Select partition type – Intel for a PC. ENTER

4.Select “Analyse” ENTER. The drive/partition will be analysed. At this screen the message “ Partition sector doesn’t have the endmark 0xAA55 “ appeared.(This happened even in the case of the other Imation 1 GB flash drive. So I would presume that this will happen with every flash drive.)

5. Select “Quick Search” ENTER

6. Press “Y” if the partitions were created under Vista or later – “N” if not. "Y" if you do not know.

7. Partition identified correctly.

8. At this stage I pressed “P” to list the files and check whether it can see the files. It
showed all the files. I copied one file to a partition on my internal drive and checked
that it played. I terminated TestDisk after this since I have to now try Partition Wizard.

If one wants to write the partition table, instead of “P”, press ENTER to continue, select ‘Write” ENTER . Quit TestDisk and reboot your PC. (Since this is a flash drive, safely remove it and plug it in.) Later I made a repeat of this exercise starting from the lowlevel format and confirmed that it was successful.
My System SpecsSystem Spec
16 Apr 2013   #10

Windows Ultimate x86, SP1

Thank you so much indeed,
When I downloaded test disk, I didn't find any file for setup. Is the test disk utility not for installing? Also when I clicked on the file highlighted in the second screenshot below, I found this error in the first screenshot below.

I am fairly sure that the question marks only show in front of each entity written in Arabic only in via exploring of Wizard because the Wizard didn't support Arabic language.
If I had proceeded to apply the two pending operations with partition recovery wizard regardless of questions mark, no thing wrong would be going on, would it?
As a result, You, of course, wanted me to apply this test disk only in order for I am quite sure that all my datas will be restored as they were, don't you?
My System SpecsSystem Spec

 My external hard drive suddenly became unllocated:

Thread Tools

Similar help and support threads
Thread Forum
Seagate External hard drive suddenly became RAW
Hello, I am having a seagate external hard disk of capacity 4TB. 1 week bafore it became undetectable and showing "format disk " while connecting to system. i have removed the case and removed the hard disk(SATA) and connected directly to system through sata power and data cable. Even it is...
Hardware & Devices
Laptop's built in external hard drive suddenly disappears/unallocated.
Hello! Long story short, my external hard drive suddenly became unallocated. I've seen some youtube guides, posts on other forums, posts on sevenforums, but I can't figure it out -- the solutions for some of these forum posts don't work for me. And so I decided to make a new thread in the hope of...
Hardware & Devices
WD external hard drive suddenly not responding
hello, i have a 1tb western digital external hard drive less than a year old. I was watching some movie and my brother turned the laptop off for an hour then when i tried to get it back on my hard drive wasnt responding anymore, it lights up and blinks the first few seconds and has that start up...
Hardware & Devices
Hard Drive 1 unllocated.
Hello I have been having a problem with my 1tb Lacie(not the grey porches) and the letter of the drive shows up but when I click it wants me to format.When I went to Disk Management most of the hard is healthy but there a small partition that has "1 Unallocated" and when I right click nothing is...
Hardware & Devices
how make drive from unllocated hard disk
i have windows 7 home basic 64 Bit OS in My Hp pavilion G-1020 model.i shrink 150 GB memory from 320 GB of C drive. it shows the unallocated file - 150 how to make drive from this unallocated hard disk..please advice me.reply me On
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:03.
Twitter Facebook Google+