Upgrading DDR3 RAM With Only 2 Slots

GIGABYTE - Motherboard - Socket 775 - GA-G41MT-S2P (rev. 1.3)
Check your board specs at this link.

Good find Solarstarshines 3gb sticks. I don't know what one would do with one of them. I will have to think on that awhile.

it wasn't easy but I found it

I Believe 8gb is his limit 2x4gb Go with Gskill that might help you out

Solarstarshines said:

I had to edit this I found 3gb DDR3 ram Centon 3GB DDR3 SDRAM Memory Module - product summary - Bing Shopping

Don't think so. This is a tri-channel kit. Three 1GB modules used in MB that support tri-channel memory buss.

Jim

Phone Man said:

Solarstarshines said:

I had to edit this I found 3gb DDR3 ram Centon 3GB DDR3 SDRAM Memory Module - product summary - Bing Shopping

Don't think so. This is a tri-channel kit. Three 1GB modules used in MB that support tri-channel memory buss.

Jim

Damn it Jim ( Dr Mccoy's voice ) you are right lol

Solarstarshines said:

Phone Man said:

Solarstarshines said:

I had to edit this I found 3gb DDR3 ram Centon 3GB DDR3 SDRAM Memory Module - product summary - Bing Shopping

Don't think so. This is a tri-channel kit. Three 1GB modules used in MB that support tri-channel memory buss.

Jim

Damn it Jim ( Dr Mccoy's voice ) you are right lol

Like a friend use to say "If I tell you it's Easter, just paint your eggs"

Jim

Eblim the only trick to memory is the motherboard manual. You must read and understand the information. You can install as much ram as the motherboard and cpu will except and use. Their is no magic ram or combination of ram. Just follow the motherboard manual. If their is one thing that should be required reading for anybody that opens a computer it should be the motherboard manual. Do some of us try things that aren't in the manusl; absolutely but we do it our own risk.

I thought it was: "if all else fails, read the manual"?

TVeblen said:

I thought it was: "if all else fails, read the manual"?

Yeah, ya gotta screw up something, then pull the manual out. :)

Britton30 said:

TVeblen said:

I thought it was: "if all else fails, read the manual"?

Yeah, ya gotta screw up something, then pull the manual out. :)

If all else fails I usually pull out the sledgehammer.