Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: H80i Advice - Noise Levels

28 May 2013   #11

Windows 7 Ultimate x64 SP1

I had one for a little while, before selling it. The way to solve the issue to update the firmware. Mine sounded like a jet engine until I finally got the Corsair software running and upgraded to the latest firmware. After that, it spun up for a few seconds, but then ran silent all the time my tower was on.

My System SpecsSystem Spec

 H80i Advice - Noise Levels

Thread Tools

Similar help and support threads
Thread Forum
Corsair H80i Problems
Got a Corsair H80i installed on a ASUS P8Ztt-V Pro board with a 3770K, all stock settings except for RAM set to specs. Connected the Corsair Link dingle berry cable and fans to the pump Y-connector. I downloaded the Link software from the Corsair site so I assume it's the newest version....
Hardware & Devices
Will a Corsair H80i be compatible with a ASUS p9x79 WS motherboard?
I have an alienware ALX full tower and it's liquid cooling system wasn't good for this motherboard (and it's 5 years old) so I decided to upgrade since I couldn't install it. I've bought a Corsair H80i off of amazon but later learned that it has a 3 pin connecter but my CPU_FAN connector has 4...
PC Custom Builds and Overclocking
H80i water cooling - Temperature issues
Hi there, just built a new pc build. I installed a h80i water cooler into my system and set up the radiator in the dual fan mount setup with the fans pushing out the back of the case, connected the usb link/power cables and it ran. installed corsair link and noticed corsair link displayed...
PC Custom Builds and Overclocking
Ink levels
How do I check my ink levels using an Epson DX4050 on Windows 7
Hardware & Devices
HP C7180 Ink Levels
Hi! I am having a problem with my HP C7180 printer. With the old PC running windows Vista, I was able to display the ink cartridge levels on the PC. Now I am running Windows 7 64 bit I find I cannot do this. The levels are displaying on the screen on the printer. Can anyone here help me?
Hardware & Devices
Recording levels
Quick summary: what is the option to view recording level when running sndvol.exe. It is no longer /r. Full problem: I have 2 objectives - to try and get volume control to more or less work as it did in XP and, to get it wotking with Adobe Audition. I have a SpeedLink sound card, which has a...
Sound & Audio

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:48.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App