Used Paragon Migrate OS To SSD (Success):Now Disk Management Confusion

I migrated my Win 7 OS from my 'C' drive to a OCZ Vertex 4 256Gb SSD. No problems, everything works fine.

But recently I was in 'Disk Management' and couldn't make sense of what I was seeing:my SSD was showing as drive 'H' with a capacity of 931Gb!

Depending on which tool I use, I get slightly different reports (Belarc: Disk Management: CrystalDiskInfo)

Anyone ever had similar confusion? and what did you do?

Probably doesn't help that when I reuse old hard disks, I usually leave Windows on them.

As I say, everything is working fine, but clearly there is some confusion around and I don't like that.

I want my reporting software to give me accurate information.

OK here's my Disk Management screenshot.....



Seeing such a garbled picture in Disk Man, I'm not quite sure what to believe: can I believe the Volume names are correct?

Here's a view taken with CrystalDiskInfo, which shows my OCZ as drive 'c'.....

I would say, Disk 2 is the SSD,should be Disk 0.

Also you have four ACTIVE Partitions one for each OS?

Umm, could be, but why has Disk Man got it wrong and not labeled it as OCZ Disc 0?

Can I recover from this confusion? If I disconnect all drives apart from SSD Boot and reconnect them one by one, will the OS identify and renumber/rename/'reletter' them correctly do you think?

As for multiple Active partitions, I've no idea whether that's a bad thing: May be unnecessary, but does it do any harm?

I guess it stems from my bad practice of reusing old hard disks without reformatting them. Could that be having an effect on the confusion?

OK this is everything disconnected, except for my 3 external drives....

Disk 2 has become Disk 0 and tagged as 'Boot',, but not identified as OCZ Vertex......booted fine.....

Curious isn't it?

label C: OCZ Vertex, as you did with the HDD.

OK, this is the picture after some more playing around.

I've marked the Active disks as Inactive and renamed the C drive as OCZ.......