Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Monitor displays "no signal" when HDMI is used

11 Aug 2015   #11

Windows 10 64-bit

Same thing here. Not sure I should start a new thread. Could this be related to Drivers?? I use a NV Card EVGA 760 and one day out of no where the screen will just go to "no signal" after logging in - it might take 5 minutes or last na hour and have to do a hard reset to get it back. I tested PSU and thats fine I reseated all cables and memory and bought a new video card upgraded to GTX 970 and still same issue. Very frustrating b/c everything has been working fine for 3 years and this PC I built.. at a loss.. i'm using HDMI cable to my LG TV.. maybe the mother board is going b/c VGA doesn't work now but I still have my card installed just not plugged in.

I'm at work today but all week I never had time to search Google online b/c of this issue. So I'll check the resolution and I have a HDMI/DVI cable from work i'll try. Any suggestions would be HUGE!


My System SpecsSystem Spec
11 Aug 2015   #12

Windows 10 64-bit

I will try this tonight god willing my screen stay on..

Troubleshoot and Fix When Windows 7 Boots Up and then a Black Screen Appears
My System SpecsSystem Spec
12 Aug 2015   #13

Windows 10 64-bit

update SOLVED: all I did was reset BIOS to default settings and then my video settings appeared, must have been something off in there. PC was on 5 hours w/o going in to that no signal screen. Just wanted to pass it along
My System SpecsSystem Spec


 Monitor displays "no signal" when HDMI is used

Thread Tools

Similar help and support threads
Thread Forum
Monitor displays "No Signal"
Hello Around 20-30 minutes ago everything was working fine I have a brand new Gigabyte g1 gtx1060 and i use a HDMI cable to connect it to my B2330HD Samsung monitor. I had a resolution set up which made the screen smaller in order to see everything on it ( because hdmi and nvidia ""love"" each...
Graphic Cards
ASUS monitor says "HDMI No Signal"
I have had my computer connected via VGA cable for years and suddenly I am getting a "HDMI No Signal" message and my computer no longer connects. There isn't even an HDMI attached to my monitor, nor was there ever one! I tried different VGA cable and even tried connecting the monitor to a...
Graphic Cards
BSOD after "No HDMI signal"
Hello, first of all i ask you sorry for my bad english. I got a problem while I was gaming and listening some music: monitor got "No HDMI signals" (music keep listening). So I did reset and after some minutes i got a bluescreen (i didn't read it because it disappeared very quickly), then i...
BSOD Help and Support
HDMI not working with TV "No Signal" - do I need a new Graphics Card?
Hey guys, For the past few years I have been running a HDMI cable to my TV. I also have a DVI going to a monitor. I have it so when the HDMI is in, the screen is automatically on TV, if HDMI is out, it will go to monitor - ease of use when watching films on larger screen. Zero issues up until...
Graphic Cards
New TFT monitor displays "No Signal" message
My old CRT monitor (Samsung 957DF) finally completely died yesterday so I had to replace it. Several months ago I bought a relatively cheap TFT monitor (Acer V223HQ Bb) and while my Windows 7 installation was still fresh, I could switch between the two monitors (Samsung CRT and Acer TFT)...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:21.
Twitter Facebook Google+