Custom Build, sudden shutdowns


  1. Posts : 34
    Windows 7 Ultimate x64
       #1

    Custom Build, sudden shutdowns


    so i made my own custom build pc and it keeps getting BSOD whenever i do something too processor intensive.
    i have 2 suggestions on why this could be happening but i thought i'd ask someone before spending money on replacement parts.

    1. my power supply is too big, sending too much power to the components making them short out?
    2. the thermal paste on my processor wasn't applied correctly? (it was done for me and now looks all burnt)

    any suggestions :)

    i always get an NTOSKRNL.exe error accompanied by some other Error but the NTOS is consistent.
      My Computer


  2. Posts : 1,045
    Win8/8.1,Win7-U64, Vista U64, uncounted Linux distor's
       #2

    1. my power supply is too big, sending too much power to the components making them short out?
    Not likely.


    2. the thermal paste on my processor wasn't applied correctly? (it was done for me and now looks all burnt)
    Possibly, do you have temp monitoring software? What are your cpu, chipset and gpu temps?
      My Computer


  3. Posts : 34
    Windows 7 Ultimate x64
    Thread Starter
       #3

    madcratebuilder said:
    Possibly, do you have temp monitoring software? What are your cpu, chipset and gpu temps?
    okay i ran some software and it said my GPU was going at 37 'c, my processor was at 37, 32, 34, 31 and my motherboard was at 41, 39 and the "AUXTIN" was at 400...

    not sure if a bug due to incompatible software or if i've got a serious problem XD
    used this: HWMonitor CPUID - System & hardware benchmark, monitoring, reporting
      My Computer


  4. Posts : 1,045
    Win8/8.1,Win7-U64, Vista U64, uncounted Linux distor's
       #4

    Pen911 said:
    madcratebuilder said:
    Possibly, do you have temp monitoring software? What are your cpu, chipset and gpu temps?
    okay i ran some software and it said my GPU was going at 37 'c, my processor was at 37, 32, 34, 31 and my motherboard was at 41, 39 and the "AUXTIN" was at 400...

    not sure if a bug due to incompatible software or if i've got a serious problem XD
    used this: HWMonitor CPUID - System & hardware benchmark, monitoring, reporting

    37, 32, 34, 31 and my motherboard was at 41, 39
    These appear to be in the normal range.



    and the "AUXTIN" was at 400...
    Certainly a error, possibly a bad sensor. Some sensors do not report correctly until they reach a certain temp. My cpu reports very low until it reaches about 40*C.

    I believe HWMonitor well allow you to log gpu temps to file, you may be able to record the gpu temps when you have the crash.
      My Computer


  5. Posts : 7,683
    Windows 10 Pro
       #5

    Two thing jump out at me thus far - you indicate this was your first build? Have you checked that the BIOS settings are correct for the memory and processor?

    Also the NTOSKRNL.exe is indicating a missing or corrupt file. You might try a Repair Install. This will allow you to keep your setting and programs in place without having to reconfigure or reinstall anything.

    Also, are you overclocking?

    Let us know.
      My Computer


  6. Posts : 34
    Windows 7 Ultimate x64
    Thread Starter
       #6

    sygnus21 said:
    Two thing jump out at me thus far - you indicate this was your first build? Have you checked that the BIOS settings are correct for the memory and processor?

    Also the NTOSKRNL.exe is indicating a missing or corrupt file. You might try a Repair Install. This will allow you to keep your setting and programs in place without having to reconfigure or reinstall anything.

    Also, are you overclocking?

    Let us know.
    how would i check the BIOS Settings ?

    and don't think it's a missing file as i've ran around 6 repair installations and tried installing the OS via 3 different discs :L get the same error every time so most likely its a hardware related problem.

    also with the Overclocking i'm pretty sure i'm not unless it's set it automatically.
      My Computer


  7. Posts : 11,424
    Windows 7 Ultimate 64
       #7

    Pen911 said:
    so i made my own custom build pc and it keeps getting BSOD whenever i do something too processor intensive.
    i have 2 suggestions on why this could be happening but i thought i'd ask someone before spending money on replacement parts.

    1. my power supply is too big, sending too much power to the components making them short out?
    2. the thermal paste on my processor wasn't applied correctly? (it was done for me and now looks all burnt)

    any suggestions :)

    i always get an NTOSKRNL.exe error accompanied by some other Error but the NTOS is consistent.
    1) If it's a quality PSU this is impossible and actually a positive situation.
    2) I would suspect a poorly mounted cooler and not the paste. Remove and replace the paste and carefully attache the cooler after cleaning all fans, fins and case fans.

    This thread should be in the BSOD section and they can help with other issues, but cooking the paste leads me to believe that the heat isn't being drawn away from the chip effectively.
      My Computer


  8. Posts : 34
    Windows 7 Ultimate x64
    Thread Starter
       #8

    linnemeyerhere said:
    Pen911 said:
    so i made my own custom build pc and it keeps getting BSOD whenever i do something too processor intensive.
    i have 2 suggestions on why this could be happening but i thought i'd ask someone before spending money on replacement parts.

    1. my power supply is too big, sending too much power to the components making them short out?
    2. the thermal paste on my processor wasn't applied correctly? (it was done for me and now looks all burnt)

    any suggestions :)

    i always get an NTOSKRNL.exe error accompanied by some other Error but the NTOS is consistent.
    1) If it's a quality PSU this is impossible and actually a positive situation.
    2) I would suspect a poorly mounted cooler and not the paste. Remove and replace the paste and carefully attache the cooler after cleaning all fans, fins and case fans.
    okay thanks for the suggestion i'm gonna go get some new paste tomorrow from the nearest shop and try mounting the CPU myself this time :)
      My Computer


  9. Posts : 34
    Windows 7 Ultimate x64
    Thread Starter
       #9

    linnemeyerhere said:
    This thread should be in the BSOD section and they can help with other issues, but cooking the paste leads me to believe that the heat isn't being drawn away from the chip effectively.
    ah okay i thought of that but believed it was more of a hardware error :L
      My Computer


  10. Posts : 7,683
    Windows 10 Pro
       #10

    Pen911 said:
    linnemeyerhere said:
    This thread should be in the BSOD section and they can help with other issues, but cooking the paste leads me to believe that the heat isn't being drawn away from the chip effectively.
    ah okay i thought of that but believed it was more of a hardware error :L
    You issue could actually fit here as well, but if you're constantly getting BSOD's you might consider posting there.

    Let us know.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 10:21.
Find Us