Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Case help needed again

10 Aug 2013   #1
BigTabs

Windows 7 64 (bit)
 
 
Case help needed again

I went to have a look at the Switch 810 and it cant fit a 360 rad (thickness 60mm) with push/pull

is there any case out there for at least £150

That will fit 360 rad top with a (thickness 60mm) in push/pull. and 240 rad (60mm thick) in push/pull.. 120 rad (60mm thick) push


My System SpecsSystem Spec
.
10 Aug 2013   #2
BigTabs

Windows 7 64 (bit)
 
 

Anyone :?
My System SpecsSystem Spec
Reply

 Case help needed again




Thread Tools




Similar help and support threads
Thread Forum
asus a8n la manual needed for moving mobo over to ATX case...
hey guys, I have an HP Pavilion a1632x with this motherboard: asus a8n-la. I'm wanting to switch it over to an ATX case that I have lying around ( i kept the case when the old asus board I had in it died a few months back), and the screws and I/O shield line up with the atx case's holes, but Im...
Hardware & Devices
The Case of the Missing Pillow Case
Please press play to set the right mood as you read. ;) NzlG28B-R8Y The Case of the Missing Pillow Case Today appeared to be a normal day just like any other. I had decided that I should strip the beds and wash the sheets from them since it had been a while and they were starting to...
Chillout Room
Case upgrade advice needed
I would like to upgrade the case for my machine and have a few questions before I order anything. The Corsair 600t is a nice roomy item but, too flashy for me with all the led's. Want to go with the Antec P280; a couple of reasons why, no led's, good cable management and room for extra...
PC Custom Builds and Overclocking
Considering New Case
I am very happy with the performance of my PC and all of the software I have in it. The only thing I don't like is the bland black case it is in. I would like one of the UV cases with a clear side panel. Something kind of jazzy. I was considering buying a new case and putting all of the parts...
PC Custom Builds and Overclocking
Recommendation for case needed!
Hello I am looking for a good looking case, prefer mid tower not full. It must be elegant , cool and quite. I will do some over clocking as well. Thank you!
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 00:29.
Twitter Facebook Google+