Paragon Migrate OS to SSD

Kaktussoft said:

truckinguy said:

Heres the values and proof of both iastor and iastorv

Iastor value start make it 0
IastorV value start make it 3

shutdown. Change BIOS to AHCI. Reboot. post results

So Ill make sure I have msachi set to 0 iastor to 0 iastorv to 3. then shutdown and on reboot go directly to bios and change to ahci then reboot.

OK?

Kaktussoft said:

What were the "start" values of iastor, iastorv and msahci before changing to ahci? So a few days ago?

Don't know..should have written them down. I have more iastor values then you ask me for..see my attachment for the many iastor's..
I noticed in my bios is offers legacy or uefi..it's set for legacy. Would that matter?
I did try the above values you gave me above just now and it still doesn't boot. It says starting windows then a blue screen flashes for a fraction of a second the it goes to the black screen with "start windows normally,etc. and will keep trying again but it leads back to the black screen. When I take it out of aschi it works. I did a windows repair earlier and it found start up issues and fixed them. Must of been the aschi values I changed because I checked them and they were reset. But as I said I just tried the latest values you suggested.
I'm stumped good on this one. I'll be in bed in short order so i'll have pick this up again in the am.

Kaktussoft said:

Try to set iator to 3 and iastorv to 0.
reboot but don't change anything in BIOS. Does it boot?
If so.. post screenshot of "device management" again. Is "IDE ATA/ATAPI-controllers" in list, if so expand that branch

I booted fine with msachi at 3 isator at 3 and iastorv to 0

No IDE ATA/ATapi controllers showing just this in my attachment.