New
#11
SATA drives don't use jumpers, the SATA header determines its position, SATA_0, SATA_!, etc. The IDE drives do use jumpers since two can be on one IDE header. If you have only one IDE drive you can try Master or Cable Select.
SATA drives don't use jumpers, the SATA header determines its position, SATA_0, SATA_!, etc. The IDE drives do use jumpers since two can be on one IDE header. If you have only one IDE drive you can try Master or Cable Select.
Hello Britton30
I also tried by removing both IDE Disk and IDE DVD writer and keep only SATA drive without jumper. But BIOS still detect SATA disk as IDE drive.
I am very much tense.
I am very much think that my mobo is not supporting this type of SATA disk. In this situation what is best option for me? .
Is there anyway to use this disk without changing mobo? .
Please suggest something
Look in the manual.
Look in section 3.4.4 Storage Configuration, of the UEFI setup, and you'll find AHCI configuration under SATA Mode Selection.
Hello madcratebuilder
I cannot find SATA option in Manual. Can you please help me more to find this.
My current setting is Enhanced and other options are AUTO in primary IDE master
Have you found the UEFI setup in BIOS? That is the place to look for the AHCI settings.
No I cannot found UEFI setup option in BIOS. Can you please give me more details according to manual.