Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: How are my temps ?

08 Nov 2013   #1
mathisfield

Windows 7 Pro 64 bit
 
 
How are my temps ?

Hello ! I had some mysterious shut-downs (PC just shut off) and opened the case up and cleaned out a ton of dust. Also, some loose cables were possibly blocking airflow. I tried to get everything cleaned up, and ran SpeedFan 4.43, and this is what I got. This is AFTER minor clean up and cable organization

Windows 7 64 bit Pro
Intel Q9550 2.83 GHZ
8 GB Memory

Temp1 - 40C
Temp2 - 35 C
Temp3 - -128 C (minus 128 C) ??
HD0 - 32 C

Core 0 - 53C
Core 1 - 51C
Core 2 - 47C
Core 3 - 47C
GPU - 51C

Thanks guys !


My System SpecsSystem Spec
.
08 Nov 2013   #2
rvcjew

7 Pro x64, 10 Pro x64
 
 

are the cores at load? and what are you using to read them? read them with realtemp, and temp 3 its always like that and normal lol. EDIT: sorry saw speedfan and i suggest you use realtemp too.
My System SpecsSystem Spec
08 Nov 2013   #3
Mark Phelps

Win7 Pro 32-bit, Win8 Pro 32-bit
 
 

If you don't trust the temps reported by SpeedFan, you can install CoreTemp and look at the temps using that.
My System SpecsSystem Spec
.

08 Nov 2013   #4
mathisfield

Windows 7 Pro 64 bit
 
 

Thanks guys, under load, using this link Fossil Free Online CPU Load or Stress Test. , three browser tabs, each tab requesting 100% load, my temps during load are

DURING LOAD / 5 MINUTES AFTER LOAD TEST

Temp1 - 82C / 49
Temp2 - 36 C / 37
Temp3 - 127 C / -128 (minus)
HD0 - 32 C / 32

Core 0 - -20C (minus) / 61
Core 1 - 99C / 57
Core 2 - 98C / 53
Core 3 - 93C / 53
GPU - 52C / 54

Using SpeedFan 4.43 to obtain temps.

Room Temp is mid-70's

Thank You again
My System SpecsSystem Spec
08 Nov 2013   #5
rvcjew

7 Pro x64, 10 Pro x64
 
 

yeah that is very hot indeed you may have had your heat sink un-seat it self and need to reapply it. you probaly have an air gap between it and the cpu, that is very hot your idle is hot too if its the 50c intel recommends to not have that cpu go over 71c. what is your heat sink is it stock?
My System SpecsSystem Spec
08 Nov 2013   #6
x BlueRobot

 

If your are going to replace the heatsink, then read the warranty and return policy for the CPU, sometimes this may become void if you replace the stock heatsink or fan.
My System SpecsSystem Spec
08 Nov 2013   #7
rvcjew

7 Pro x64, 10 Pro x64
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
If your are going to replace the heatsink, then read the warranty and return policy for the CPU, sometimes this may become void if you replace the stock heatsink or fan.
i think he just has to re-seat it. that is a good thing to check though.
My System SpecsSystem Spec
09 Nov 2013   #8
Mellon Head

Win 7 Pro x64/Win 10 Pro x64 dual boot
 
 

Quote   Quote: Originally Posted by rvcjew View Post
Quote   Quote: Originally Posted by x BlueRobot View Post
If your are going to replace the heatsink, then read the warranty and return policy for the CPU, sometimes this may become void if you replace the stock heatsink or fan.
i think he just has to re-seat it. that is a good thing to check though.
I would apply new thermal paste at the same time, especially if it is a stock HS/Fan. I use Arctic Silver 5 and have great luck with it, but a lot of aftermarket pastes are better than the stuff that comes with stock coolers.
My System SpecsSystem Spec
09 Nov 2013   #9
rvcjew

7 Pro x64, 10 Pro x64
 
 

Quote   Quote: Originally Posted by mathisfield View Post
Thanks guys, under load, using this link Fossil Free Online CPU Load or Stress Test. , three browser tabs, each tab requesting 100% load, my temps during load are

DURING LOAD / 5 MINUTES AFTER LOAD TEST

Temp1 - 82C / 49
Temp2 - 36 C / 37
Temp3 - 127 C / -128 (minus)
HD0 - 32 C / 32

Core 0 - -20C (minus) / 61
Core 1 - 99C / 57
Core 2 - 98C / 53
Core 3 - 93C / 53
GPU - 52C / 54

Using SpeedFan 4.43 to obtain temps.

Room Temp is mid-70's

Thank You again
also idk what that test is supposed to do to load my cpu but it put mine to 16% lol at the 100% bubble, to load it you should use prime95 but do not do that till you re-seat your heat sink with new thermal paste, and make sure you clean the old stuff off the cpu top and the heat sink it self. here's a guide to do it right if you need it.>http://www.arcticsilver.com/pdf/appm..._line_v1.1.pdf
My System SpecsSystem Spec
Reply

 How are my temps ?




Thread Tools




Similar help and support threads
Thread Forum
Does anyone think these temps are off?
Hi all i am posting a new OC with a new cpu i currently installed a 965 BE oc'ed to 4.1 ghz are these temps correct because cpuz can't detect them this also happened with my previous cpu 2.8 925 deneb but temps were really low with that one too round 16 to 14 c I also have a hyper 101 heatsink...
Hardware & Devices
i7 930 temps?
So my buddy asked me to post this regarding his i7 930 temperatures. He's running a ASETEK 510LC 120MM WATERCOOLER, but his temperatures vary among his cores. On average, his cores idle around 50, but each core has a different temperature, such as 46 to 55. On a watercooled system, those temps...
PC Custom Builds and Overclocking
Temps OK?
Now summer has arrived here in England I was wondering if my temps are OK as you experts will know better than me :) It is quite warm in my living room where my rig resides. TIA Steve
Hardware & Devices
CPU temps
Hi Guys, I fitted a new cpu and artic cooler pro 7 (rev 2) a month or so ago. Since then the temps in each core vary a fair bit from each other and 1 core seems locked at 40 degrees for some reason. Room temp is currently 13 degrees The temps as I type this are -
Hardware & Devices
Tell me what u think about my cpu & gpu temps
cpu- phenom II x4 945- 30c idle 62c 100% loads/stress testing(cpu is rating max 70c) gpu- 9500gt- idle 45- load havnt seen it pass 55c my temps arnt bad though i think i should increase fan speed on gpu to get idle down a bit. what are u guys temps?
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:48.
Twitter Facebook Google+