Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: multiple issues after clean install

26 Nov 2013   #1
Erick Aguilar

Windows 7 professional X64
 
 
multiple issues after clean install

Hello guys.

I was hoping you could give me a hand here. I was experiencing multiple stop 0x00124 errors on my system. I was told it could have been caused by an overclock. My apu is an a10 5800k with a base clock a nd turbo boost of 3.8 and 4.2ghz respectively.

I purchased an r9 280x last week and it installed flawlessly on my system. Performance was great for days before i started getting bsods. I did not want to risk it and decided to perform a clean install. Since then ive had nothing but troubles.

Had a hardtime making my motherboard recognized my flashdrive with windows 7 installation files. Got a message that my copy of windows was not genuine and had to call phone support, video output would sometimes not be detected. Etc etc... Then i finally managed to get a consistent run on the machine and decided to plug in my bavkup drive. To my surprise the computer wont boot with it plugged.

I checked bios and habilitated it again but im sure that should not have been the reason. I left to work and decided to work on the computer later that day. Come back amd fore it up. Now i dont get video signal but i do get sound. I unpligg my gpu and run off the onboard. NOW as soon as windows boots up i get a distorted screen and latdr it does take me to my desktop properly. Amd displays a message saying that drivers had to be reset. I did so and later put back my gpu now i dont have any video problems at all.

What could be happening? Its certainly overwhelming. This is also my work pc and the levels of stress are rising.
System specs:

amd a10 5800k
radeon r9 280x xfx
kingston hyper blue 2x 4gb sticks
gigabyte f2a85xx up4
Cooler master silent pro 850w
2 seagate hdds 500 and 1500 gb.
Amd video drivers are 11 beta 9.4
Amd chipset are 9.4
I did not install any drivers from the motherboard dvd this time.

Any help would be inmensly appreciated


My System SpecsSystem Spec
.
26 Nov 2013   #2
Erick Aguilar

Windows 7 professional X64
 
 

I have started multiple hardware testing.

Starting with ram on memtest will do 3 passess on each ram sepparately then 2 passes on each DIMM slot to be sure, at the end I will test both ram sticks togheter on dual channel like they always are.

I still want to test the CPU, HDD, Motherboard GPU and PSU further, I will elaborate on the issues in detail as the above post was typed in a phone.

In order:

- When trying to boot from USB BIOS would not detect it. And would not launch OS from HDD either. Refreshing BIOS settings fixed the issue.
- OS successfully installed. As I can not find my ethernet cable, proceed to install my wireless drivers once my desktop is up. Reboot system to complete installation, greeted by a message ''This copy of windows is not genuine'' Call phone activation and issue was resolved after having to reinstall my OS.
- Proceed with installation of chipset drivers from AMD. No issues detected. Reboot performed
- Proceed with installation of video drivers from AMD. No issues. Reboot Performed
- Turn off computer and plug in second HDD which only contains data. Turn on system I either did not get video, or the computer was not able to load windows. Reboot performed Message saying that windows did not shut down properly. Boot into BIOS. abilitated second HDD. Boot into windows on safe mode to verify HDD in drive manager, Reeboot performed.
-Install scheduled updates. Reboot Performed
-System turns on, install audio drivers. Shut down for the rest of the day.
-Wake up, computer turns on, no video. Can hear the windows log on screen, Reboot performed
Message displayed 'Windows was unable to start, perform start repair/system rollback' managed to boot back into windows.
-Shut down computer, remove GPU in fear the GPU is causing issues. Boot computer with the APU graphics only through HDMI
-Computer shows motherboard logo and windows loading logo fine. Get to welcome screen and there is severe video distortion. Gets cleared up once i reach my desktop and see a message saying that drivers for video have failed, prompted to reset drivers. Do so and computer proceeds with installing drivers for the 7660D igpu on the APU. No video problems after. Shut down computer.
-Install GPU again, make sure everything is correctly plugged, boot into windows with no problem.

Hardware testing initiated.

Now.. i have a small belief that my USB with windows 7 was damaged or corrupted in some way? I had not used it for months as no reformatting had been required, is it possible that something went wrong with the windows installation?

What software can I use when testing my components individually?

Thank you guys.
My System SpecsSystem Spec
26 Nov 2013   #3
Erick Aguilar

Windows 7 professional X64
 
 

First ram stick tested. no errors. second stick, as soon as i put it in and fire it up, i did not receive video signal at all, my monitor was flashing the power button as looking for a video source. restarted with the same ram stick, then got video. I am currently testing it.
My System SpecsSystem Spec
.

26 Nov 2013   #4
Erick Aguilar

Windows 7 professional X64
 
 

second stick tested, no errors at all rebooted and got video immidiately. testing both sticks together now.
My System SpecsSystem Spec
26 Nov 2013   #5
Erick Aguilar

Windows 7 professional X64
 
 

tested both sticks, no errors.
Stressed tested GPU in OCCT for an hour and 30 minutes, no errors
now testing CPU on base clock to verify if there are any issues.
My System SpecsSystem Spec
Reply

 multiple issues after clean install




Thread Tools




Similar help and support threads
Thread Forum
Multiple BSOD after clean install
First, very slick BSOD tool! I installed a new WD 2TB HD and performed a clean install of Win 7 with service pack 1 slip-streamed. I was surprised to get multiple BSOD on my Dell Studio XPS 8100. I have researched this for the past week and found: Malwatebytes caused BAD POOL HEADER BSOD and...
BSOD Help and Support
Few issues after Clean Install(Win 7) on new SSD
Laptop - Sony Vaio VPCEE23FX OS - Windows 7 Home Premium x64 CPU - AMD Athlon II P320 Dual Core 2.1GHz Memory - 8GB (2 x 4gb) DDR3/1066MHz Graphics Card - ATI Mobility Radeon™ HD 4250 Graphics (max resolution 1366x768) Hard Drives - Capacity: 256GB SSD Hi
Installation & Setup
Multiple BSODs after clean install of W7 on new HDD?
Hi guys, today Im coming to you to help me with my BSOD problems. I used to have a failing hard drive and bad Ram sticks which corrupted Windows. I replaced those two with a new hard drive and 8 gb of Ram and installed a clean version of windows 7 ultimate. Ever since then, Ive been getting...
BSOD Help and Support
Clean Win 7 Pro install issues
Installed Windows 7 Pro in this system I built in April 2011. No major issues and has functioned very well. For a little background, I have Win 7 on a Vertex3 drive, data on a Vertex 3 drive and both are backed up to a Seagate drive. I have used the Casper backup programs for years and currently...
Installation & Setup
Multiple BSOD on clean install!
Had windows xp pro 64 bit installed with no issues, installed windows 7 home premium and now I have been getting all sorts of BSOD and different error codes, here are my most recent minidumps.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 13:07.
Twitter Facebook Google+