Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: [WTA] Installing RAM on N68C-GS FX motherboard

30 Nov 2013   #1

Windows 7 Ultimate 64 BIT
[WTA] Installing RAM on N68C-GS FX motherboard

I have this motherboard, and I intend to add 2GB of RAM. My question is, is it possible if I install on both slot, which is DDR2 and DDR3 and utilize the RAM installed from both slot? My PC currently runs AM3 CPU, so I guess it supports the utilization from both slots. Just need a clarification on this. Thanks

My System SpecsSystem Spec
24 Dec 2013   #2

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10

Personally mate I would stick (no pun) with DDR3 because you are going to get better performance out of it in any case and I stand to be corrected but mixing the two types seems to me to be asking for conflicts.

PS I meant to add if you are doing this one stick of 4GB DDR3 will be the optimum things to use.
My System SpecsSystem Spec

 [WTA] Installing RAM on N68C-GS FX motherboard

Thread Tools

Similar help and support threads
Thread Forum
ASROCK n68c-gsfx FX6300 overlock
HELLO to everyone! i tried to overclock FX6300 from 3.5Ghz to 4.0-4.4,but everytime i try to run Prime95 to stress,everything froze or WIn10 "BSOD" and restart,i only play around with multiplier,on this PC i have asrock n68c-gsfx(i know it's not very good for OC) i wrote everything i found on...
PC Custom Builds and Overclocking
Will an AMD FX-6300 work with an AsRock N68C-GS FX
Hi All, As the title says, will an AMD FX-6300 processor work with an ASRock > N68C-GS FX motherboard? I'm planning to upgrade my system due to FPS drops whilst playing DOTA 2. I've concluded that since the FPS drops happen after several minutes while playing and seem to have nothing to do...
Hardware & Devices
ASRock N68C-GS FX Network controller driver
Hi folks, I have fresh installatioin of Windows 7 Ultimate SP 1 x32 edition running on my PC. When I go to Device Manager I see that my Network Controller drivers are not properly installed. My network card is also listed as beeing Nvidia nForce Network Controller which is incorrect. After...
Restart issues with new motherboard Asrock N68C-S UCC
Hey guys, I am new to the forum, just signed up. To start things off I wanna ask if any of you have any experience with the Asrock N68C-S UCC motherboard or ever had to deal with a restart issue I'm facing with the Asrock N68C-S UCC. I just did a clean install after replacing my old ASUS...
Hardware & Devices
installing new motherboard
hi everyone, i just bought a new motherboard. before it gets here, i need some clarification on installation. i know i back up my hard drive so i can restore my things and settings later right? and then i know ill have to do a clean install of windows 7. what i'm not clear on from reading...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:04.
Twitter Facebook Google+