New
#61
I mean you just have to know what you are buying. Some PSUs have more cables detachable than others, and you don't want to be surprised.
Do you hear that?..............................No, I don't either. That is because the new PSU is installed and running extra quiet. It was not hard at all. Thanks for giving me the help to do it. The only problem I ran into was after I had connected all the cables and it looked ready to go. I flipped the Power Switch and nothing. I made sure all cables were connected and then thought I would check the 24 pin cable to the Motherboard. I just wiggled it and everything lit up and was going. == Here it is.
It looks good Jim, glad you got it. Yup some of the connectors can be hard to get fully seated. A nice crisp "click" lets you know it's seated.
A little trick on some of the larger connection that are very tight.
Spray a little silicone on a cloth and wipe down the out side of the male connector.
Not on the wire ends just the black connector. It will help it to slide in.
Those connectors do fit tight and that is good.
It also help with molex connectors which can be very hard to seat the connection.
I think we all have problems disconnecting; the silicone will help their also.
As long as one use a quality silicone spray like 3M.